100G QSFP28 BREAKOUT AOC

T&S Communication TSQSS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 SR4 for 100G Ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber without FEC, or 300 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. As a professional AOC factory, T&S produces our 100G QSFP28 series with consistently high quality.

Features of 100G QSFP28 BreakoutAOC

Electrical interface compliant to SFF-8436 and SFF-8431

850nm VCSEL laser and PIN photo-detector

Built-in digital diagnostic functions

Operating case temperature 0℃ to 70℃

Hot Pluggable

Similar to the other AOC cables produced by T&S, such as our 40G AOC, our 100G breakout AOC cable is also RoHS-compliant

Applications of 100g breakout cable

100GbE and 25GbE break-out applications for Datacom switch and router connections

100G to 4×25G density applications for Datacom and Proprietary protocol applications, Datacenters

Specifications of 100g qsfp28 aoc

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	TS	-20	85	℃
Relative Humidity	RH	0	85	%
Case Operating Temperature	TCase	0	70	℃
Supply Voltage	VCC	-0.3		V

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Case Operating Temperature	TCase	0	-	70	℃
Supply Voltage	VCC				V
Supply Current (QSFP28)	ICC	-	-	1000	mA
Supply Current(SFP28)	ICC	-	-	300	mA
Data Rate Per Lane	DR	-		-	Gbit/s

Transmitter Specifications

Measurement condition: Channel data rate 25.78125Gbps, VCC=3.3V, PRBS31 pattern, Case operating temperature 0-70℃.

Parameter	Symbol	Min	Typical	Max	Unit
QSFP28
Center wavelength	λc	840	850	860	nm
Differential Input Impedance	Zin	90	100	110	Ohm
Differential Input Voltage	Vin	300	-	1100	MVP-p
Average Launch Power per Lane	PAVG	-7.5	-1	+2.5	dBm
Extinct Ratio	ER		-	-	dB
SFP28
Center wavelength	λc	840	850	860	nm
Differential Input Impedance	Zin	90	100	110	Ohm
Differential Input Voltage	Vin	300	-	1100	MVP-p
Average Launch Power	PAVG	-7.5	-1	+2.5	dBm
Extinct Ratio	ER		-	-	dB

Receiver Specifications

Measurement condition: Channel data rate 25.78125Gbps, VCC=3.3V, PRBS31 pattern, Case operating temperature 0-70℃

Parameter	Symbol	Min	Typical	Max	Unit
QSFP28
Center wavelength	λc	840	850	860	nm
Differential Output Impedance	Zout	90	100	110	Ohm
Differential Output Voltage	Vout	500	-	800	MVP-p
Receiver Overload	Pinmax	+2.5	-	-	dBm
Bit Error Rate	BER	-	-	10-12	-
SFP28
Center wavelength	λc	840	850	860	nm
Differential Output Impedance	Zout	90	100	110	Ohm
Differential Output Voltage	Vout	500	-	800	MVP-p
Receiver Overload	Pinmax	+2.5	-	-	dBm
Bit Error Rate	BER	-	-	10-12	-

TS Communicationis a professional optical transceiver supplier, we provide optical communications products, qsfp28 patch cord, qsfp28 aoc cable, qsfp28 fiber cableand etc. Want to know more? Please contact us.

Другие товары поставщика

	QSFP28 100G CWDM4 2K	The 100g qsfp28 er-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G...
	PLC CHIP	PLC CHIP As a professional plc splitter manufacturer, T&S provides a wide range of different fiber optic components at reasonable prices. Based...
	QSFP28 100G CWDM4 2K	QSFP28 100G CWDM4 2K The QSFP28 100G-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for hi...
	TFF 1310/1550NM FWDM	T&S FWDMDevice is a product that can customize the transmission band or the reflection band within the wavelength range of 1260-1680nm; it can ...
	FIBER BRAGG GRATING	As the "Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province ", T&S fiber Bragg grating manufacturertakes the fron...

Все товары поставщика

Похожие товары

	FT wax used for EVA-based hot melt adhesive	Продавец: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	Продавец: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	Продавец: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	Продавец: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	Продавец: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...