100G QSFP28 DIRECT ATTACH CABLE
QSFP28 Direct Attach Cables are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m).
Features of 100G Direct Attach Cable
Up to 25.78Gbps data rate per channel
Up to 5m transmission
Hot-pluggable QSFP+ 38 PIN footprint
Compatible to SFF-8665
Compliant with IEEE 802.3bj
Single 3.3V power supply
Temperature Range: 0~ 70 °C
RoHS compliant
Applications of 100G QSFP28 Direct Attach Cable
Low EMI radiation switches, servers and routers
Data center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
Specifications of 100G QSFP28 Direct Attach Cable
Mechanical Specifications
|
Parameter |
Minimum |
Typical |
Maximum |
Unit |
|
Cable Diameter (26AWG) |
- |
- |
Inches |
|
|
Bend Radius (26AWG) |
- |
- |
Inches |
|
|
Cable Diameter (28AWG) |
- |
- |
Inches |
|
|
Bend Radius (28AWG) |
- |
- |
Inches |
|
|
Cable Diameter (30 AWG) |
- |
- |
Inches |
|
|
Bend Radius (30 AWG) |
- |
- |
Inches |
|
|
Within Pair Skew |
- |
- |
100 |
ps/10m |
|
Cable Insertion Loss |
- |
- |
dB/5m |
|
|
Bulk Cable Time Delay |
- |
- |
ns/m |
|
|
Bulk Cable Impedance |
95 |
100 |
105 |
Ohms |
|
Insertion Force |
- |
- |
40 |
N |
|
Withdrawal Force |
- |
- |
30 |
N |
|
Retention Force |
90 |
- |
- |
N |
|
Durability |
50 Cycles |
- |
- |
- |
Ordering Information
|
P/N |
Length |
Data Rate |
AWG |
Length Tolerance |
|
TSQS-PC1HG-01M |
1M |
100G |
28 / 30 |
+3.5/-3.5cm |
|
TSQS-PC1HG-02M |
2M |
100G |
28 / 30 |
+3.5/-3.5cm |
|
TSQS-PC1HG-03M |
3M |
100G |
28 / 30 |
+4/-4cm |
|
TSQS-PC1HG-05M |
5M |
100G |
26 |
+6/-6cm |
Recommended Operation Condition of 100G QSFP28 Direct Attach Cable
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Operating Case Temperature |
Topc |
0 |
70 |
degC |
|
Storage Temperature |
Tst |
-40 |
85 |
degC |
|
Relative Humidity (non-condensation) |
RS |
35 |
60 |
% |
|
Supply Voltage |
VCC3 |
V |
||
|
Voltage on LVTTL Input |
Vilvttl |
-0.3 |
VCC3 +0.2 |
V |
|
Power Supply Current |
ICC3 |
15 |
mA |
|
|
Total Power Consumption |
Pd |
- |
W |
Notes:
Stress or conditions exceed the above range may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
As one of the mostprofessional fiber optic accessories suppliers, we provide optical communications products, qsfp28 patch cord, qsfp28 aoc cable, qsfp28 fiber cableand etc. Want to know more? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
SFP 10G LR | T&S TSPP-31192-LR is a Series single-mode, Pluggable Fiber-Optical SFP for 10G Ethernet, compliant with the IEEE 802.3ae 10GBASE-LR/LW standard... |
 |
Solutions for 40G QSFP+DAC/AOC Direct Connection Cable | Direct cable is an ideal short-distance connection solution to replace optical transceivers. It can be divided into two categories: high-speed cabl... |
 |
MTP®/MPO Harness Cable | MTP/MPOharness cables are a kind of MTP®/MPO fanout harness cable or breakout fiber optic harness assemblywith one MTP®/MPO connector on on... |
 |
FIBER OPTICAL TRANSCEIVERS | As a leading fiber optical transceiver manufacturer, T&SCommunication supplies a full range with all-round categories from 10Gb/s to 100Gb/s op... |
 |
FBG Strain Sensor | ES-01 sensor measures the strain by utilizing the inherent feature of strain-sensitivity of FBG. The sensor fits to be embedded to measure the stra... |
