TC Seal
TC materials have features of high hardness, strength, abrasion resistance and corrosion resistance. It is known as “Industrial Tooth”. Due to its superior performance, it has been widely used in military industry, aerospace, mechanical processing, metallurgy, oil drilling, electronic communication, architecture and other fields. For example, in pumps, compressors and agitators,TC sealsare used asmechanical seals. Good abrasion resistance and high hardness make it suitable for the manufacture of wear-resistant parts with high temperature, friction and corrosion.
Categories of TC Seal Material
According to its chemical composition and usage characteristics, TC can be divided into four categories: tungsten cobalt (YG), tungsten-titanium (YT), tungsten titanium tantalum (YW), and titanium carbide (YN).
Tungsten cobalt (YG) hard alloy is composed of WC and Co. It is suitable for processing brittle materials such as cast iron, nonferrous metals and non-metallic materials.
Stellite (YT) is composed of WC, TiC and Co. Due to the addition of TiC to the alloy, its wear resistance is improved, but the bending strength, grinding performance and thermal conductivity have decreased. Because of its brittleness under low temperature , it is only suitable for high-speed cutting general materials and not for the processing of brittle materials.
Tungsten titanium tantalum (niobium) cobalt (YW) is added to the alloy to increase the high temperature hardness, strength and abrasion resistance through appropriate amount of tantalum carbide or niobium carbide. At the same time, the toughness also is improved with better comprehensive cutting performance. It is mainly used for hard cutting materials and intermittent cutting.
The carbonized titanium base class (YN) is a hard alloy with the hard phase of TiC, nickel and molybdenum. Its advantages are high hardness, anti - bonding ability, anti - crescent wear and anti - oxidation ability. At a temperature of more than 1000 degrees, it can still be machined. It is applicable to the continuous-finishing of alloy steel and quenching steel.
Mechanical Sealing Material
Rubber Seal
Stainless Steel Seal
PTFE Seal
Carbon Seal
Ceramic Seal
SiC Mechanical Seal
TC Seal
Material Property of TC Seal
Sealcon mainly selects the materials of YN and YG series to provide customers with high quality TC Seal service.
|
model |
nickel content（wt%） |
density(g/cm²) |
hardness(HRA) |
bending strength(≥N/mm²) |
|
YN6 |
1800 |
|||
|
YN8 |
2000 |
|
model |
cobalt content（wt%） |
density(g/cm²) |
hardness(HRA) |
bending strength(≥N/mm²) |
|
YG6 |
1800 |
|||
|
YG8 |
1980 |
|||
|
YG12 |
2400 |
|||
|
YG15 |
2480 |
|||
|
YG20 |
2650 |
|||
|
YG25 |
2850 |
There are many cartridge seal suppliers, but Hangzhou Sealcon Fluid Machinery Co., Ltdare one of the best choices for you. we provide quality mechanical sealsand etc. Fortypes of mechanical sleeve or more information, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MECHANICAL SEALS | What are mechanical seals (End-face Mechianical Seal)? Also known as a face seal, the mechanical seal is a rotary machine shaft seal device, refers... |
 |
Mechanical Seal Material | According to statistics, about 80% to 95% of the leakage of mechanical seals is caused by sealing faces and friction pairs. Flygt pump seals has th... |
 |
DOUBLE CARTRIDGE MECHANICAL SEALS | The double cartridge mechanical sealis a pre-assembled package of seal components, which make the installation much easier to prevent potential ins... |
 |
MECHANICAL SEALS FOR PUMP | Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisti... |
 |
Ceramic Seal | Ceramic material refers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advant... |
Похожие товары
 |
FT wax used for EVA-based hot melt adhesive | Продавец: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Продавец: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Продавец: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | Продавец: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Продавец: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
