Welding Water Cooler

• 

The welding cooleris a compact, economical, energy-saving and heat-dissipating circulating cooler, which has the characteristics of portability, convenient operation and long service life. It is mainly used to help cool the heating parts of mechanical equipment such as AC and DC argon arc welding equipment, gas shielded welding equipment, plasma equipment resistance welding machine, laser machine and so on.

Types Of Welding Water Cooler
WRC-300 10L Tig Welder Cooler
WRC-350 20L Water Cooled Welder
WRC-500 25L Welding Water Chiller
Precautions For Welding Water Cooler In Winter
Add and replace the cooling water timely. Please use pure water for cooling water

Alcohol antifreeze must be replaced in winter to avoid damaging the radiator

Precautions For The First Use Of Welding Water Cooler
Make sure that the injected cooling water (pure water) is is enough

When using it for the first time or leaving it unused for a long time, make sure that the motor is started, and the welding gun can be installed after the cooling water is sprayed, otherwise the motor will not be easy to start.

If the motor is running normally (the radiating hole has the feeling of wind blowing), but the water output is too small or unable to output water, you can drive the air from the air compressor into the water outlet or water inlet for 20 seconds and discharge the air in the pump to improve.

Now the industrial water cooler priceis affordable, if you have needs to buy industrial water chiller, please leave us a message.

Другие товары поставщика

	CW6000 450W CO2 Laser Water Chiller	CW6000Co2 Laser Water Chiller with a cooling capacity of 3000W can cool co2 laser tubes below 450W. CW6000 is a high-precision compression water ...
	CW6000 450W CO2 Laser Water Chiller	CW6000 450W CO2 Laser Water Chiller CW6000 co2 laser water temperature chillerwith a cooling capacity of cw 3000can cool co2 laser tubes below 450...
	Chiller CW 5200 For 8KW CNC Spindle	Chiller cw 5200 is a small intelligent water chiller, suitable for cooling the spindle of numerical control equipment below 8kw, and used to cool t...
	Fume Extractor	Fume extractor is a kind of mobile industrial dust purifier equipment, which is mainly used to purify the smoke and exhaust gas that are harmful ...
	XLNT-3000 3000W Fiber Laser Cutter Chiller	XLNT-3000 3000W Fiber laser cutter chilleris suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode...

Похожие товары

	FT wax used for EVA-based hot melt adhesive	Продавец: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	Продавец: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	Продавец: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	Продавец: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	Продавец: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...