HMHG Series Harmonic Drive Hat Type

The flexspline belongs to hollow flanging standard structure, compact design, zero backlashes, coaxial output and input, excellent positioning accuracy, and rotation accuracy.

HMHG Series Harmonic Drive Hat Type List

HMHG-Ⅰ Series Unit (Hollow Shaft) power drive gearbox

With compact hollow shaft and a robust cross roller bearing which enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Light weight is very important for some applications, HMHG-I-LW is available for lightweight solution. HMHG-I is available in 6 size with ratios from 50:1 to 160:1

MCG-II, wave generator with integrated cam for HMCG-II-E. The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. The absence of input and output flanges features a fabulous flexible design. HMHG-II is available in 6 size with ratios from 50:1 to 160:1.

HMHG-Ⅲ Simple Unit Flat Hollow Shaft Series Harmonic Drive

High torque simplicity series with a hollow input shaft, the absence of input and output flanges features a fabulous flexible design. HMHG-III is available in 6 size with ratios from 50:1 to 160:1.

HMHS-IV Unit (Shaft Input) Series Harmonic Drive

The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Fully sealed and easy to mount to motor. Performs fantasy on bevel gears and synchronous belt device applications.

HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Drive

With input shaft can mount to motor directly. Low speed hollow shaft through supply lines, shafts or cables. Encoder can be mounted to both input and output shaft. Especially for Cobots and the device with joint modular.

Read More +

Design Guide Of HMCG Series Harmonic Drive Cup Type

In Order To Give Full Play To The Performance Of Harmonic Reducer, Please Pay Attention To The Follo

Make the input shaft, circular spline, output shaft, and shell concentric.

Wave generators can produce axial force. Please make the input shaft into some structure that can support the force.

Since the harmonic reducer is a small device that can transmit larger torque, please adopt suitable tightening torque to tighten the screw that connects the flex spline with the output shaft.

Flexspilne can have elastic deformation, so please adopt the recommended size to design the inner wall of the shell.

Input shaft and output shaft must adopt matched bearings (leave space for 2 - point support) and the structure that can bear radial load and axial load. Please do not exert too much force on the wave generator and flex spline.

Make sure the flange diameter of the flex spline does not exceed the wheel bore diameter of the flex spline and process fillet on the flange that connects the diaphragm. Please adopt the recommended size to design all parts.

Use a C-shape clamp ring to fix the hub of the wave generator and make sure the hook of the clamp ring does not touch the

If you need any kinds of harmonic drive for sale, please contact us, as a professional harmonic drive company, Han's Motion is willing to offer you high quality products.

Другие товары поставщика

	HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Gearing	HMHG-II series flex spline belongs to the hollow flanging standard structure and the whole structure is compact. Its input shaft connects with the ...
	Buy Harmonic Drive	Through big data modeling, simulation optimization and performance verification, cheap harmonic drive company Han's Motion team realizes the optima...
	HMCD-Ⅱ Unit (Super Flat) Series Harmonic Drive	HMCD-II series, with a commitment to lightweight and compact size of harmonic gear transmission, not only inherits the advantages of traditional pr...
	HMHD Series Harmonic Drive Hat Type	Simple combination type (super flat hollow shaft), pursuing flat structure to the extreme, suitable for the application with the requirement on fla...
	HMCG-Ⅱ-E Series Unit (Integral Cam) Harmonic Drive	HMCG-II-E series flex spline is a cup-shaped standard structure, input shaft connects with the wave generator inner hole directly fixed through a f...

Все товары поставщика

Похожие товары

	MONSA® DDAC-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture...
	MONSA® DCA-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp...
	MONSA® CTAC-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ...
	MONSA® CTAC-30	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly...
	Инжектор Common Rail	Продавец: 德艾普(  xiamen) импорт и экспорт  Co., Ltd.	Артикул: Инжектор дизельного топлива　　　　　　　　　 Модель №: MOQ: 1 шт.　　　　　　　　　　　　　　　　Материал: Стал...