DeMessia zigzag tester
Все товары поставщика
Compliance Standards
IEC 60695-2-1 (Fire hazard testing)
ISO 6722 (Road vehicles - 60 V and 600 V single-core cables)
ASTM D5422 (Standard Test Method for Mechanical Endurance of Electrical Insulation)
EN 50396 (Non-electrical tests for low voltage energy cables)
Core Advantages
Smart angle compensation algorithm (±0.5° accuracy)
Triple-sensor monitoring (angle/force/temperature)
IP54 protection grade for industrial environments
Cloud-based test data management (optional)
Key Features
Modular test head design (3 interchangeable jaw types)
Real-time waveform display of bending force
Self-diagnosis system with 20+ error codes
Emergency stop with electromagnetic braking
Multi-axis programmable control (XYZ)
Test Capabilities
Continuous flexing test
Torsion-bending combined test
Cold bend test (-40°C with optional chamber)
Conductor resistance monitoring during test
Standard Accessories
3 jaw sets (V-slot/Flat/Roller types)
Calibration weight set (50N/100N/200N)
TestWire Pro analysis software
Emergency toolkit (spare fuses/connectors)
Technical Parameters
| Bending Radius | 0.5-25mm (electronic adjustment) |
| Test Speed | 10-120 cycles/min (software-controlled) |
| Angular Range | ±180° (0.1° resolution) |
| Max. Cable Diameter | Ø30mm (with extension kits) |
| Force Measurement | 0-500N (±0.5% FS) |
| Power Supply | 3PH 380VAC ±10% / 50Hz |
| Data Output | USB/RS-232/Ethernet |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Metal Bone Screws Torque Tester | Standard YY/T 1506, ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
 |
Sharp Tip Tester | Meet the standard: ASTM F963 EN 71-1 ISO 8124-1 Product Introduction: Certain points on toys, if excessively sharp, can cause injuries. Safe... |
 |
Helmet Goggles High Speed Particle Impact Testing Machine | Main Purpose To test the impact - resistance performance of glasses, goggles and face shields at a certain speed. Applicable Standards SNELL SA/... |
 |
Pump and Valve Contamination Tolerance Tester | Meet the standard: ISO 4406 ISO 18413 ISO 10707 ISO 6403 ISO 10372 NFPA T2.6.1 Product Introduction: Solid particle contamination is a maj... |
 |
KES - FB2 - SH Single - Strand Bending Tester | Content The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, and diffusion differences in a si... |
