Bright Annealed Tubes

Product description

Bright Annealed Tubes Description

Bright annealed stainless steel tube is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.

bright annealed tubecan be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.

The traditional bright annealing furnace for stainless steel tubesis performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.

Especially for the tube with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing of stainless steelmethod, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is not possible for the regular annealing.

To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel tubing used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.

Type Of Tube: Welded tubing and Seamless Tubing

Straight Tubes Bright Annealing Advantages

Bright Annealed Tubes Sizes

welded tubing size range

OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm

Length: CUT TO LENGTH

The seamless straight tubing & bright annealed tubing sizes:

OD(mm)*T.W (mm)

6×1/6×1.5

10×1/10×1.5/10×2

12×1/12×1.5

16×1/16×1.5/16×2

Bright Annealed Tubes Materials

Austenitic Stainless Steel:

TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367

Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760

Nickel Alloy Steel:

N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675

Bright Annealed Tubes Standard

ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516

Heat Treatment: Bright Annealed

NDT: Eddy Current or Hydraulic test or UT

Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel

GradeCSiMnPSCrNiMoTiNWithFeTo theWhatZrNbTuwill

MaxMaxMaxMaxMaxMaxMaxMaxMaxMax

Nickel Alloy

Inconel 600/No6600/2.48160.150.510.01514-17≧720.56.0-10.0

Inconel 600/No6601/2.48510.10.51.50..0-1.7

Inconel 690/No66900.050.50.50..57.0-11.0

Inconel 625/No6625/2.48560.10.50.50.0150.01520-23≧588.0-10.0≦0.45≦0.43.15-4.15

Inconel 718/No7718/2.46680.080.350.350.0150..8-3.30.65-1.150.0060.3Remainder0.2-0.84.75-5.5

Incoloy 800/No8800/1.48760.111.50..15-0.60.75≧39.50.15-0.6

Incoloy 800H/No8810/1.49580.05-0.111.50..6-1.20.75≧39.50.15-0.61

Incoloy 825/No8825/2.48580.050.510.0319.5-23.538-462.5-3.51.5-3≧220.2

C-276/No10276/2.48190.010.0810.040.0314.5-16.5Balance15.0-17.04.0-7.02.53-4.50.35

Monel 400/No4400/2.43600.30.520.024≧6328-342.5

Monel K-500/No55000.180.51.50.01630.35-0.8527-3322.3-3.15

Alloy 20/No8020/2.46600.07120.0450..0-3.03.0-4.0Balance8C-1

Alloy 28/No80280.0312.50.030..0-4.00.6-1.4Remainder

Duplex Steel

S31803 / 1.44620.03120.030.0221-234.5-6.52.5-3.50.08-0.2

S32205/1.44620.03120.030.0222-234.5-6.53.0-3.50.14-0.2

S32750/1.44100.030.81.20.0350.0224-266.0-8.03.0-3.50.24-0.320.5

S32760 / 1.45010.05110.030.0124-266.0-8.03.0-4.00.2-0.30.5-1.0

Austenitic

304/1.43010.08120.0450..5

304L / 1.43070.035120.0450.0318-208.0-12.0

304H / 1.49480.04-0.1120.0450.0318-208.0-11.0

316/1.44010.08120.0450.0316-1811.0-14.02.0-3.0

316L / 1.44040.035120.0450.0316-1810.0-14.02.0-3.0

316H / 1.49190.04-0.1120.0450.0316-1810.0-14.02.0-3.00.1

316Ti / 1.45710.08120.0450.0316-1810.0-14.02.0-3.00.7>5x(C+N)

321/1.45410.08120.0450.0317-199.0-12.00.7>5x(C+N)

321H / 1.48780.04-0.1120.0450.0317-199.0-12.0H

317/1.44490.08120.0450.0318-2011.0-14.03.0-4.0

317L / 1.44380.035120.0450.0318-2011.0-15.03.0-4.0

347/1.45500.08120.0450.0317-199.0-12.0

347H / 1.49120.04-0.1120.0450.0317-199.0-13.0

310S/1.48450.08120.0450.0324-2619.0-22.00.11

310H / 1.48450.04-0.1120.0450.0324-2619.0-22.0

N08904(904L)/1.45390.02120.0450.0319-2323.0-28.04.0-5.00.11.0-2.0

S31254 (254Mo) /1.45470.020.810.030.0119.5-20.517.5-18.56.0-6.50.18-0.220.5-1.0

Bright Annealed Tube Pressure Calculation Formula

Pressure =(wall thickness * 2 * tensile strength of steel tube)/(outer diameter * coefficient)

Wall thickness =(pressure * outer diameter * coefficient)/(2* tensile strength of steel tube)

Steel tube pressure P<7Mpa coefficient S=8

7< steel tube pressure P<17.5 coefficient S=6

The pipe pressure P>17.5 coefficient S=4

Другие товары поставщика

	180 Degree Elbow	The connection form of 180 degree elbow is butt welding elbow and steel pipe directly. According to its curvature radius, butt welding can be divid...
	Forged Rings	Product description Forged Rings Features Forming type :forging Rating: ANSI150LBS~2500LBS, DIN PN6~PN160 JIS 5K~30K, HG PN0.25~PN25 Size :15mm&mda...
	Weld Neck Flanges	Product description WELDING NECK RISE FACE FLANGE（WNRF） Stainless steel weld neck flanges are popularly used in excessive stress applications, wi...
	Bright Annealed Tubes	Similar Products Heat Exchanger Tubes 100% PMI test, 100% Hydraulic test, 100% inner cleaned by sponge, 100% Dimension test, 100% Surface test. ...
	Long Neck Flanges	Similar Products Socket Weld Flanges Socket weld flanges are counter-bored to receive the pipe earlier than being fillet welded. Threaded Flanges B...

Все товары поставщика

Похожие товары

	Intelligent Precision Glue Control System	Продавец: 855005	Intelligent Precision Glue Control System The Golden Horse GM-4020 is an intelligent glue concen...
	JM-5416D Automatic Rigid Box Making Machine	Продавец: 855005	JM-5416D Automatic Rigid Box Making Machine The JM-5416Dintelligent visual fully automatic box m...
	Positioning Machine JM-600B	Продавец: 855005	Positioning Machine JM-600B The vision positioning machineis the core component for producing li...
	Automatic Feida Gluing Machine JM-600A	Продавец: 855005	Automatic Feida Gluing Machine JM-600A Automatic Gluing Machineis used for gluing the cover pape...
	Automatic Grooving Machine JM-1200	Продавец: 855005	Automatic Grooving Machine JM-1200 The JM-1200 Automatic Cross Grooving Machineis capable of bid...