.

Busbar Insulation Coating

The silicone rubber insulation coating is made from special silicone rubber, high-performance material and other polymers by polymer blending technology. Its basic structural unit is silicon - oxygen chain while its side chain is connected by silicone with another organic radical group. Therefore, this structure makes the coating well combine the properties of both organic and inorganic compound. This product can used for the equipment and components which need protection of insulation, thermos conduction, fire retardant, dampness-proof, etc., such as bare wire, busbar, cable, high-power generator, dry-type reactor, dry-type transformer, switch cabinet and so on, it's quite suitable for the electrical equipment which operated in contaminated and humid environments.

Product Standard of Busbar Insulation Coating:

DL/T 627-2012 Room Temperature Vulcanized Silicone Rubber Anti-Pollution Coating for Insulators

IEEE 1523 IEEE Guide for Application, Maintenance, and Evaluation of Room Temperature Vulcanized (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators

Contact us get more details about RTV-II Silicone Rubber Coating, such as TDS, Application Method, OEM etc.

Product Features of Busbar Insulation Coating:

Item

Silicone Rubber Insulation Coating

Heat Shrink Tube

Electrical Insulation

Excellent electrical insulation. Breakdown Voltage is more than 25 kV/mm.

Common performance.

Cover Effect

Excellent adhesion.The coating layer is intense, it could strongly stick to the equipment surface and could well resist to the corrosion caused by acid, alkali, salt and air.

Common cover effect especially in the connection part.

Thermal Conductivity

The coating has closely attached to the conductor and has good thermal conductivity could better release the heat of equipment. Its thermal conductivity is 0.2W/ (m. k), which is ten times then air.

Relatively poor due to there is air gap between the tube and equipment.

Flame Retardant

Hard to burn and has good fire retarding ability up to FV-0 Class.

Easy to deform, crack and broke.

Application

Favorable hardness makes its construction time is short. (less than one working day)It can well fit and protect the surface of special shaped equipment or components and special connection position so that to make the conductors as one.

Long construction time and need to disassemble the equipment.It’s easy to crack and broken for the coating on the special shaped equipment or components and the connection or twist place.

Maintenance

Easy to maintain and repair. The coating will not affect the dismounting of screw or bolt. Moreover, if recoating, the new coating can have integrated fuse with the old coating tightly.

Although it’s also convenient to maintain and repair, but the connection place is easy to peel and broke.

Ageing Resistance

Good hydrophobicity and resistance to ageing, dampness, ozone, radiation, UV, etc. make it free of maintenance and can serve for a long time. Its service life could be more than 20 years.

Poor ageing resistance, its service time is about 5 years or even less especially in some bad environment the cracking and break phenomenon will happen.

Economic

Excellent performance at reasonable cost.

Lower cost.

Ruisenis a professional silicone coating suppliers, we provide anti algae coating, algae resistant paint, anti algae paintand etc. Want to know more? Please contact us.



Отправить запрос, связаться с поставщиком

Кому: Fujian Ruisen New Materials Co., Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Multifunctional Insulator Cleaning Agent RS-10
Multifunctional Insulator Cleaning Agent RS-10 We have high voltage insulators for sale! Multifunctional Insulator Cleaning Agent (RS-10) is mainly used for eradicating dirt, dust and contamina...
Multifunctional Insulator Cleaning Agent RS-10
Multifunctional Insulator Cleaning Agent RS-10 Multifunctional Insulator Cleaning Agent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, es...
Anti-Algae & Anti-Fouling Coating
Anti-Algae & Anti-Fouling Coating Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in C...
Busbar Insulation Coating
Busbar Insulation Coating The silicone rubber insulation coating is made from special silicone rubber, high-performance material and other polymers by polymer blending techn...
Enhanced Anti-pollution Flashover Coating RTV-II
Enhanced Anti-pollution Flashover Coating RTV-II A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental cond...
Все товары поставщика

Похожие товары

“Gold Lion” Series Spring Machine M98-5
“Gold Lion” Series Spring Machine M98-5 Продавец: Zhejiang Chuangyu Machinery Technology Co., Ltd. 型号:5mm 弹簧磨床5mm 弹簧磨床3mm 弹簧磨床钢丝直径(mm) φ0.8-φ5 . φ0.5-φ3.0线圈外径(mm) 6-60 4.5-40弹簧高度(...
7 axis CNC spring making machine CK740
7 axis CNC spring making machine CK740 Продавец: Zhejiang Chuangyu Machinery Technology Co., Ltd. 型号:CK740 7轴数控弹簧机有7个伺服电机,彻底摒弃了繁琐的CAM机械卷轴滑块;由数控系统直接控制弹簧的外径和外径,弹簧的转动只需要使用控制系统来调整,不需要更换机械减速器。辅助取芯刀的上下...
CNC Wire Rotating Spring Forming Machine
CNC Wire Rotating Spring Forming Machine Продавец: Zhejiang Chuangyu Machinery Technology Co., Ltd. Model: CNC642A Type Machine Features CNC642A wire rotating spirng forming machine adopts CNC cont...
Top and Bottom Plug
Top and Bottom Plug Продавец: SHANDONG SAIGAO GROUP CORPORATION As one of the oil equipment suppliers, Saigao Groupspecializing in design, research, and developm...
T165 Triplex Plunger Pump
T165 Triplex Plunger Pump Продавец: SHANDONG SAIGAO GROUP CORPORATION As one of the oil equipment suppliers, Saigao Groupspecializing in design, research, and developm...