.

CNC HORIZONTAL TURNING LATHE CENTER FOR WHEEL HUB


The CNC horizontal turning lathe center bed adopts "mineral casting" material and technology of Germany, which guarantees DEED CNC horizontal turning center with better performance on accuracy maintenance and stability for a longer time. DEED model HP800-WC cnc turning machine for sale is mainly used for turning to machine of 12-22inch passenger car wheel and truck bus wheel, CNC horizontal turning lathe center also can be used for turning of similar disc parts.

FEATURES OF CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB
*Mineral casting rectangular hard rail bed has good seismic resistance, small thermal sensitivity coefficient, and good overall rigidity.

*Mineral casting spindle box has small vibration, high speed, and high efficiency, which is about 30% higher than the market average.

*According to the needs of the cnc horizontal turning center industry, specially ordered imported spindle units for machine tools.

*Automatic door structure, less time to open and close the door (within 2S).

*The chip conveyor is separated from the water tank, which makes cleaning and maintenance more convenient

*More reasonable internal layout and strong cooling of flushing chips to avoid chip accumulation without manual cleaning.

*The extremely ingenuity cnc horizontal turning center design brings a more convenient operation and clamping experience.

BENEFITS OF CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB
Mineral casting 45°slant bed. -The maximum length of embedded parts is 1750mm.

45 steel hardened with hardness HRC52 ~ 61.

During cnc horizontal turning center assembly, the accuracy of the linear guideway rail is less affected by temperature.

The cnc horizontal turning center bed is stable with minimal vibration.

The diameter of embedded parts reaches Φ 400mm.

Compared with iron casting HT300, mineral casting the vibration amplitude during cnc horizontal turning center machining is reduced by 20%.

For a 9.0x22.5 inch truck and bus wheel, rough and finish turning speed can be stable at 1000 pm.

Φ160 combined bearing. -High precision and rigidity.

Multi-wedge belt drive reduces the influence of the belt on high-speed rotation accuracy. -Multiple sealing structures to prolong service life.

HOW DOES CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB WORK?
CNC horizontal turning center adopts brake belt brake, which is mainly composed of brake wheel, brake belt, and lever. In the brake device, the brake wheel is a steel disc connected with the shaft by splines. A layer of steel mesh asbestos is fixed on the steel brake belt and the inner side to improve the friction coefficient. One end is linked with the spindle box, and the other end is fixed on the upper end of the lever. The brake belt of the horizontal lathe can be adjusted. The brake belt can be placed and adjusted by directly loosening the screw connecting the brake belt and the spindle box. When the CNC horizontal turning center is adjusted properly, the brake belt can be released when the spindle rotates, but when the clutch is released and the horizontal lathe is stopped, the brake belt holds the brake wheel tightly, so as to realize the rapid stop of the spindle and achieve braking.

WHAT IS A CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB USED FOR?
DEED CNC Horizontal Turning Lathe Center HP800-WC for wheel machining application: Passenger car wheel, truck, and bus wheel machining first procedure, a second procedure, finish turning to the machine. After the coating of some passenger, wheels is completed, the "finish turning" process is required for side A (front). According to different processes, it can be divided into the following "finish turning": bright surface, super-bright surface, sub mirror surface, and mirror surface. The general criteria for evaluating the "finish turning" ability of wheel machining machine tools: clear and uniform lines, high finish, no light, and dark lines, no over cutting, etc.

CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB SPECIFICATION

HTC800

Feed Maximum rotation diameter φ850 mm
Maximum wheel diameter 22" inch
Maximum length wheel 12" inch
X axis travel -30~370mm
Z axis travel 850mm
X/Z axis rapid traverse 20/20 m/min

Spindle Spindle max speed 2500 rpm
Spindle power 30/37 kW
Spindle torque 375 N.m
Spindle nose specification A2-8
Spindle neck φ160 mm

ATC Tool quantity 8
Inner diameter tool size φ50 mm
Maximum outer diameter hilt size 32*32 mm
Adjacent tool change time 0.6 sec

Screw X-axis φ50*P10 mm
Z-axis φ50*P10 mm

Precision X-axis positioning 0.008 mm
Z-axis positioning 0.008 mm
X-axis repeatability 0.006 mm
Z-axis repeatability 0.006 mm

Others X/Z axis servo motor power 4/4 kW
X/Z axis servo motor torque 22/22 N.m
X/Z servo motor max speed 3000 rpm
Cooling water tank capacity 600 L
Machine size(not including chip conveyor) 4169*2150*2147 mm
Machine net weight 11 T
Control system FANUC 0i-TF

HTC900

Feed Maximum rotation diameter φ850 mm
Maximum wheel diameter 22" inch
Maximum length wheel 12" inch
X axis travel -30~370mm
Z axis travel 850mm
X/Z axis rapid traverse 20/20 m/min

Spindle Spindle max speed 2500 rpm
Spindle power 30/37 kW
Spindle torque 375 N.m
Spindle nose specification A2-8
Spindle neck φ160 mm

ATC Tool quantity 8
Inner diameter tool size φ50 mm
Maximum outer diameter hilt size 32*32 mm
Adjacent tool change time 0.6 sec

Screw X-axis φ50*P10 mm
Z-axis φ50*P10 mm

Precision X-axis positioning 0.008 mm
Z-axis positioning 0.008 mm
X-axis repeatability 0.006 mm
Z-axis repeatability 0.006 mm

Others X/Z axis servo motor power 4/4 kW
X/Z axis servo motor torque 22/22 N.m
X/Z servo motor max speed 3000 rpm
Cooling water tank capacity 600 L
Machine size(not including chip conveyor) 4169*2150*2147 mm
Machine net weight 11 T
Control system FANUC 0i-TF

Most Required CNC Machines

5 axis gantry type machining center

Horizontal boring and milling center

CNC drill tap machine

Planer type horizontal boring machine

Horizontal machining center with pallet changer



Отправить запрос, связаться с поставщиком

Кому: Shandong Deed Precision Machine Tool Co.,Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

5 AXIS CNC GANTRY TYPE MACHINING CENTER
5 AXIS CNC GANTRY TYPE MACHINING CENTER 600*600mm large cross-section ram of 5 Axis CNC gantry type machining center to ensure that even when the ram is overhung, the gantry CNC 5 axis ga...
CNC Milling and Boring Machine
CNC Milling and Boring Machine The maximal rotation of spindle can reach 2500rpm/min It can meet the large-torque requirement during the rough machiningand the high rotation...
VL-SERIES VERTICAL MACHINING CENTER
VL-SERIES VERTICAL MACHINING CENTER VL series vertical machining center is a small and medium-sized vertical machining center designed by Germany and made in China. It mainly aims at ...
HBP Series Planer Type Milling and Boring Machine
HBP Series Planer Type Milling and Boring Machine The X/Y/Z servo axis adopts the servo motor direct connected precision planetary reducer to drive the large-diameter, high-precision double nut pre...
VMC-SERIES VERTICAL MACHINING CENTER
VMC-SERIES VERTICAL MACHINING CENTER As a vmc machine manufacturing company, DEED vmc cnc-series Vertical Machining Center is mainly suitable for processing complex parts such as plate...
Все товары поставщика

Похожие товары

Панама-Криохранилище для крови-Тележка для сосуда дьюара
Панама-Криохранилище для крови-Тележка для сосуда дьюара Продавец: Хэнань Тяньчжидао Биотехнология Лтд. В области биологических исследований контейнеры с жидким азотом являются одним из незаменимых уст...
Бутан-Криохранилище эмбрионов-Подставка-тележка для сосуд дьюара
Бутан-Криохранилище эмбрионов-Подставка-тележка для сосуд дьюара Продавец: Henan Tianchi Instrument & Equipment Co., Ltd. В области биологических исследований контейнеры с жидким азотом являются одним из незаменимых уст...
Бельгия-сосуд дьюара с большим горлом-подставка под сосуд дьюара
Бельгия-сосуд дьюара с большим горлом-подставка под сосуд дьюара Продавец: Henan Tianzhidao Biological Technology Co., Ltd. В области биологических исследований контейнеры с жидким азотом являются одним из незаменимых уст...
ЮАР-сосуд дьюара для лаборатории-сигнализация жидкого азота
ЮАР-сосуд дьюара для лаборатории-сигнализация жидкого азота Продавец: Хэнань Тяньчжидао Биотехнология Лтд. В сфере научных исследований важно сохранять исходное состояние образцов. Cосуд дьюара для лабора...
Оман-Лаборатория сигнализации уровня жидкости Дьюара
Оман-Лаборатория сигнализации уровня жидкости Дьюара Продавец: Henan Tianchi Instrument & Equipment Co., Ltd. В сфере научных исследований важно сохранять исходное состояние образцов. Cосуд дьюара для лабора...