Continuous Emission Monitoring & Process Control

• 

The instruments and analyzers produced by one of the best continuous emission monitoring system suppliers, ZETIAN, a professional cems analyzer manufacturersnow are widely used at home and abroad. They are: UV DOAS gas analyzer, laser TDLAS gas analyzer, gas analysis module, forward/backward laser dust monitoring devices, hygroscope for high temperature, continuous emission monitoring system (CEMS), denitration escape ammonia analyzer, sulphur analyzer, trace Cl analyzer system, immersive UV broad spectrum water analyzer, ammonia nitrogen analyzer, colorimetric heavy analyzer, anodic stripping voltammetry heavy metal analyzer etc.

After years of developing, ZETIAN, as one of the most professional manufacturers of cems measurement, has cooperated with and attracted many worldwide clients of online gas analysis and process control, including system integrator, agents, operation and maintenance providers, CEMS equipment manufacturers, thermal power plants, sewage treatment plants, chemical plants and the like.

Working Principle of CEMS System (Particulate Matter)

Features of the particle measurement subsystem:

1. 2. The probe does not touch the smoke;3. Because standard materials are difficult to obtain,CEMS manufacturersusually calibrates with filters;4. Dust and water vapor have a greater impact and are not suitable for measurement after wet purification facilities unless the flue gas is reheated to a temperature above the dew point of water5. The back blowing air curtain needs 24 hours of operation (also when the furnace is stopped);6. Changes in particulate composition and particle size affect the calibration of such analyzers;

Particulate matter online performance requirements:

Zero drift: ≤ ± 2% F.S.;Span drift: ≤ ± 2% F.S.;Correlation coefficient: ≥0.85 (when the upper limit of the measurement range ≤50mg / m³, ≥0.75)

Working Principle of CEMS System (Gaseous Pollutants)

Classification of online monitoring methods for gaseous pollutants:

2. dust particle measuring device, and then use clean zero gas to dilute the dedusted flue gas according to a certain dilution ratio to reduce the concentration of gaseous pollutants, and introduce the diluted flue gas into the analysis unit for concentration analysisb. Direct extraction and sampling method (heating pipeline method): Insulate the dedusted flue gas through the heating pipe to keep the flue gas without dew condensation, send it to the drying device for dehumidification, and then send it to the analysis unit for concentration analysis.Features of dilution extraction system:1. UV fluorescence measurement SO2, chemiluminescence measurement NOx;2. Multiple analysis unit combinations are required;3. The oxygen content needs to be equipped with a separate sampling system or a direct measurement method;4. The measurement data needs to be converted into the dry flue gas value in the standard state;5. The sample gas transmission does not use heating pipeline;6. The air used for probe dilution needs to be strictly controlled;7. Probe dilution ratio needs to be calibrated at any time;Features of the direct extraction system:1. Infrared / ultraviolet light absorption measurement and analysis unit;2. One analysis unit can measure SO2, NOx, CO2, CO at the same time;3. The oxygen measurement (O2) unit and infrared unit can be placed in the same analyzer together;4. The measured data is the dry flue gas value in the standard state, the data is intuitive;5. Sample gas transmission adopts heating pipeline (above 120 ℃)6. The pretreatment system is complex;7. Requires good sealing;

As one of the best continuous emission monitoring system suppliers, what we can offer are high cost-effective intellectual monitoring instrumentation and analysis equipment, analysis module /component, CEMS program sets, complete set of water quality analysis program and other similar products. OEM and ODM are acceptable for us, and we can also provide operation, maintenance and other services.Continuous Emission Monitoring System (CEMS) consists of particulate matter monitoring subsystem, gaseous pollutants monitoring subsystem , flue gas parameters monitoring subsystem, system control and data acquisition and processing subsystem. It can monitor gases such as SO2, NOx, O2, dust, temperature, pressure, flow rate, etc. And theprecision humidity metercan monitor humidity.It can also be extended for a specific occasion to monitor HCl, HF, CO, CO2, NH3, H2S, Cl2, VOC and other parameters. The measured gas passes through sampling probe for dedusting, heating tube for sampling, then goes into the gas analysis module violet differential optical absorption spectroscopy (DOAS) for analysis measurements. It effectively solves the technical problems of dust and moisture interference on measurement, particularly in the case of low concentration measurements with an unparalleled advantage.It applies to the emission monitoring and process analysis of coal-fired power plant, garbage power plant, cement, glass, lime factory, ceramics factory, sinter, coke oven, the process of desulfurization and denitration technology.

HANGZHOU ZETIAN TECHNOLOGY CO., LTD, specialized in air quality monitor,was established in 2008 and has a national wide impact in China now as a rapid development company in environmental protection and industrial process control.Contact us for more information.

Другие товары поставщика

	HM-200 Hygronom	Overview Hygronom is used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas con...
	EQMS-200 VOCs Online Monitoring System	Overview EQMS-200 VOCs online monitoring system adopts PID (photoionization detector ) for gas detection. The target gas is irradiated I bombarded ...
	WDet-7000 Integration Water Quality Online Analyzer	WDet-7000 multi parameter water analyzeris a high-level integration of a multi parameter water analyzer. Our multi parameter water analyzer uses a ...
	HM-200 Hygronom	Overview Hygronom is used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas con...
	EQMS-200 VOCs Online Monitoring System	Overview EQMS-200 VOCs online monitoring system adopts PID (photoionization detector ) for gas detection. The target gas is irradiated I bombarded ...

Похожие товары

	Explosion-proof Dust Collector for Sale	Продавец: Dongguan VILLO Technology Inc.	VJFCB Series – High Negative Pressure Explosion Proof AtexDust Collector VJFCB Series is a...
	CASH RECYCLER MACHINE MANUFACTURER	Продавец: hjlkiosks	Cash recyclerkiosk is an automatic cash processing equipment, which integrates the characteristic...
	Plastic Pipe Welding & Cutting Machines	Продавец: Wuxi Plaswelding machinery Co.,Ltd	Electric Welding Equipment The electric welding machine is the special equipment for PE pipe ele...
	CNC Machine Tool Touch Probe System	Продавец: Harbin Pioneer M&E Technical Development Co.,Ltd	CNC Machine Tool Touch ProbeSystem Pioneer touch probes for CNC machines can measure and find ...
	HIGH-SPEED WARP KNITTING MACHINE	Продавец: CHANGZHOU RUNFENGYUAN TEXTILE MACHINERY MANUFACTURING CO.,LTD	Tricot Warp Knitting Machine for Sale After years of R & D and practice, Changzhou runfengyu...