Metal Heat Transfer Thermal Oxidation Device（TNV）

• 

Metal heat transfer thermal oxidation device（TNV） is used to purify industrial waste gases containing high concentrations of organic pollutants, The direct fired thermal oxidizersystem is characterized by a very high utilization rate of heat in system. Combined with a downstream heat recovery system, the unit is inexpensive to operate and requires only a small amount of external fuel heating.

HOW DOES THE TNV TECHNOLOGY WORK

After a heat transfer, the exhaust gas is directly burned by the combustion machine, combined with the heat released by the oxidation and decomposition of the solvent itself, which makes the furnace reach 750~800℃, and stays for 1~2 seconds, and the final destruction efficiency can reach 99.8%.

TNV Air Flow Range & Efficiency

Applicable flow rates from 2,000 to 55,000 Nm³/h

Heat utilization of 76% within the system

Heat recovery systems for air, water, oil, steam, and for absorption chillers

Low maintenance

Long service life

Easy operation

TNV Design Features

Preheating device: The metal heat transfer thermal oxidation device (TNV) needs to be heated to above 700 degrees to start the oxidation reaction. The system requires a large amount of heat. The use of a preheating heat exchanger, along with the heat from the high-temperature exhaust gas exiting the oxidizer, can significantly reduce fuel consumption.

Automatic temperature control: The temperature for carrying out the oxidation reaction can be set as required, and the output of the burner is automatically adjusted by PLC to maintain the temperature according to the temperature inside the metal heat transfer thermal oxidation device (TNV).

For more information about dfto, please feel free to contact us!

RUIYUAN, as one of the mostexcellent offset printing machine manufacturers, offers a wide range of metal decorating pressfor you to choose from.

Другие товары поставщика

	Regenerative Thermal Oxidizer (RTO)	Regenerative Thermal Oxidizer (RTO) produced by RUIYUAN uses ceramic media to recover upwards of 97% of the available energy and is widely consider...
	Auxiliary Equipment	As a system supplier Shanghai RUIYUAN printing equipment Co., Ltd provides all the auxiliary equipment necessary to ensure smooth highly automated ...
	Drying	The drying systems are used at the end of the metal printing pressand coating production lines in order to improve the print quality and yield. The...
	UV Drying Machine	The introduction of the LED UV multi-color system has revolutionized UV curing in the metal printing industry. One LED UV lamp is installed between...
	Air Cleaning System	Shanghai RUIYUAN printing equipment Co., Ltd provides complete printing and coating lines in the most varied configurations, especially for metal p...

Похожие товары

	Bowl Set	Продавец: Yangjiang Bohao ENTERPRISE CO., LTD	Food Serving Bowl Set The 4 collapsible colorful bowl setincludes Small (350ml), Medium (500ml),...
	Ferrite Pot Magnets	Продавец: NingBo BeiLun Meank Magnetics Co.,ltd.	Meank, a professional china pot magnet manufacturerand pot magnets supplier, provides ferrite cup...
	Water Spray Test Chamber	Продавец: Xi’an LIB Environmental Simulation Industry	LIB Water Spray Test Chamberis used for the ingress protection tests involves immersing the equip...
	Cobalt Metal	Продавец: Beijing Huasheng Metal Materials Co., Ltd	Cobalt Metal for Sale Cobalt is a shiny steel-gray metal, relatively hard and brittle, ferromagn...
	CONVENTIONAL WPC CLADDING	Продавец: Shantou Wallong Technology Co., LTD	Conventional cladding and WPC slatted cladding for outdoorhave the potential to make the building...