Tungsten Carbide Mining Tips Octagonal Carbide Bits for Core Drilling
1.Material:
We use 100% virgin tungsten carbide material to reach the requires of good wear resistance and high impact resistance.
2.Application:
The octagonal tips are brazed in the drill bits set, normally used for very soft and unconsolidated formations, or hole cleaning. With a greater number of cutting edges, these tips are more wear and less prone to chip or shatter.
Другие товары поставщика
|
|
Various Sizes power tools flat and square Tungsten Carbide Micro End Mill cutter/ball nose |
Unique sharp edge with 20 degrees back angle, to achieve the effect of shock absorption, cutting process stability.cutting process stability. The d... |
|
|
Yk05 / Yk20 Tungsten Carbide Rock and Mining /Drilling Tools Bits/ Button/ Tips |
Tungsten carbide buttons are mainly used for high and low pressure DHT drill and hydraulic Screw-in drill and so on. They are suitable for hot inse... |
|
|
Tungsten Carbide Drawing Die for wires |
Tungsten Carbide Drawing Die for wires 1. Diameter range (0.12—15.0)mm 2. Good wear resistance HRA 89.0—93.0 3. Excellent polishing 4. ... |
|
|
5xd/3xd Tungsten Carbide Twist Drilling Bits /Cutting Tools /Milling cutter/Without Coolant hole |
Rang of application: Side face, step shoulder, straight slot Item: 35, 45, 30 degree spiral angle, D range: D12-0.20 12<-0.030 . Working hardnes... |
|
|
Manufacturer Tungsten Carbide Rotary Dental Burrs |
Description RotaryBurrsalsocalleddebur, is agrindingtoolusedbyPneumaticorelectricGrinder, which isused formilling,deburring,breakedges,trimprocessw... |
Все товары поставщика
Похожие товары
