Heavy Gauge Cut To Length Lines

Cut To Length lineChinais a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line China according to client’s special requirement by combining different component. Every CTL line is engineered and constructed differently for customers, it is customized designed and built, it is considered when choosing a right CTL line about some specifics like production capacity, running speed, material thickness and width, etc. Quality and standard checks are strictly performed on our product before releasing to our valued customers.

Available raw material for cut to length line is hot rolled steel, cold rolled steel, galvanized steel, pre-painted steel, high tensile steel, stainless steel, aluminum, copper, alloys.

The whole line consists of coil car, double support uncoiler, hydraulic pressing and guiding side device, shovel head, pre-leveler, high precision leveler, cut to length machine, stacker, electric control system, hydraulic system, etc. as well as pendulum middle plate and steering device.

Main Technical Parameters of Heavy Gauge Cut To Length Lines

RISHBIN heavy gauge cut to length linesare built for speed and ease of use and can produce higher line speeds without experiencing material slippage. Cut-To-Length Line and Blanking Line will make your job easier, cut costs, and increase your profits.

The lines can be supplied with start-stop shears, flying shears. For start stop shear, the sheet is stopped for each cut of the shear. They can cut a variety of lengths and thicknesses. Electric controls are used to stop the leveler drive after the required length has been fed through the shear and to initiate shear action, then the subsequent feeding of the sheared length to the stacker. For flying shear, it’s a high production solution

Here is working process:

Steel coils are transferred by an entry coil car and loaded onto an uncoiler. From uncoiler the strip proceeds through a five-high precision leveler designed to level steel within the desired material gauge range and yield strength. The strip then proceeds through a squaring unit and precision roll-feed unit to the high speed shear, where it is cut to required length. The cut sheet then moves to float sheet stacker where it is stacked on a pallet and is then moved onto the semiautomatic packaging line for wrapping.

Benefits of Cut to Length lines

Minimal tooling preparations and higher productivity rates

Energy efficient

Reduced operating costs

High in speed and strength

High input and output rates

Extreme sheet flatness due to high precision levelers

Exact cutting accuracy

Другие товары поставщика

	Medium Gauge Cut To Length Lines	Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leve...
	Heavy Gauge Cut To Length Lines	Cut To Length lineChinais a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, ...
	Rotary Shear Cut To Length Lines	Rotary Shear Lines are mainly used for CR, S.S, Al material, precision leveling and cutting products. This line special advantage is non-stop cutti...
	Stainless Steel Slitting Machine	Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Classification and Characteristics of Stainles...
	Steel Slitting Line/Machine	Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Operating Procedure of Preparatory work befor...

Похожие товары

	XD-MAX Winch for Drone	Продавец: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d...
	XD-55 Winch for Drone	Продавец: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng...
	XD-10 Winch for Drone	Продавец: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport...
	Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series	Продавец: Uratech USA Inc	TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
	Uratech Tool scoot cart for 50 taper tool holders	Продавец: Uratech USA Inc	Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...