SMT Assembly

SMT refers to surface mount technology, which is the most popular technology and production process applied in the circuit board assembly line. In the pick and place system, it is the circuit assembly technology that mounts no-lead or short-lead surface assembly components on the surface of a printed circuit board or other substrates, then solders and assembles them by reflow soldering or IP soldering. The advantages of SMT chip mounter: high assembly density, the small size of electronic products, lightweight, high reliability, strong vibration resistance, easy to realize automation, help customers improve production efficiency, reduce costs by 30%-50% by saving materials, energy equipment, manpower, time, etc.

TronStol is a professional surface mountthat supplies you with matured PCB/SMT/SMD assembly line, contact us to get more information!

The Advantages of SMT Assembly

SMT Assembly makes the creation and production of electronic circuits easier.It is especially important in complex circuits. Higher levels of automation have saved our entire industry time and money.Smaller size and reduced weight are the two main advantages of SMT. Components can be more closely aligned, and the final product will be more compact and lighter.

The main advantages of SMT Assembly:

SMT Assembly Process

The assembly process of SMT and its process flow mainly depend on the type of surface mount component (SMA), the types of components used and the conditions of assembly equipment. In general, SMA can be divided into three types of single-sided mixed assembly, double-sided mixed assembly and full-surface assembly, a total of six assembly process. Different types of SMA have different SMT assembly process, and the same type of SMA can also have different SMT assembly process.

Choosing an appropriate assembly method according to the specific requirements of the patch processing and assembly products and the conditions of the assembly equipment is the basis for efficient and low-cost assembly and production.It is also the main content of the SMT process design.

The first type is single-sided hybrid assembly that is SMC/SMD and through-hole plug-in components (17HC) are distributed on different sides of the PCB, but the welding surface is only one-sided. This type of assembly process all use single-sided PCB and wave soldering (currently double wave soldering is generally used).

The second type is double-sided hybrid assembly. SMC/SMD and THC can be mixed and distributed on the same side of the PCB. At the same time, SMC/SMD can also be distributed on both sides of the PCB. Double-sided hybrid assembly adopts double-sided PCB, double wave soldering or reflow soldering. In this type of assembly method, there is also a difference between the first-sticking process and the after-sticking SMC/SMD. Generally, it is reasonable to choose according to the type of SMC/SMD and the size of the PCB. Usually, the first-sticking process is more adopted.

The third type is full-surface assembly, with only SMC/SMD on the PCB and no THC. As the current components have not yet fully realized SMT, there are not many such assembly forms in practical applications. This type of assembly method is generally assembled on a PCB or ceramic substrate with fine-line patterns, using fine-pitch devices and reflow soldering processes.

Difference between SMT and SMD Assembly

SMD is the abbreviation of Surface Mounted Devices which is one of SMT (Surface Mount Technology) components, including CHIP, SOP, SOJ, PLCC, LCCC, QFP, BGA, CSP, FC, MCM etc.

Surface mount components were introduced about twenty years ago, and this opened a new era. From passive components to active components and integrated circuits, they eventually become surface mount devices (SMD) and can be assembled by pick and place equipment. For a long time, people believed that all pin components could eventually be packaged in SMD.

SMT is the abbreviation of Surface Mount Technology which is currently the most popular technology and process in the electronics assembly industry.SMT is a new generation of electronic assembly technology which compresses traditional electronic components into a device with a volume of only a few tenths, thus realizing high-density, high-reliability, miniaturization, low-cost, and automatic production of electronic products.This kind of miniaturized components is called: SMD device (or SMC, chip device). The process method of assembling components on the printed board PCB is called SMT process.

At present, SMT technology is mainly realized through equipment which mainly includes loader machine, solder printer, automatic pick and machine, reflow oven, and various auxiliary tools and equipment.

The Reason Why Choose Tronstol SMT Line

lThe software isindependently by own R & Dteam

lOur company is one of the earliest domestic pick and place machine industry with a history of 10 years

lWith strong R & D capabilities who can accept customization from hardware to software

lMore than 50 patents and quality certifications

lThe pick and place machine has high precision which could mount 0201 stably

As one of the most professional smt equipment manufacturers, we provide you different kinds of smt manual pick and place machineat a cheap price to save your cost.

Другие товары поставщика

	Automatic Pick and Place Machine	TronStol A1 is the latest high-precision laser flying mounter developed by our company, which can stably and efficiently mount high-precision compo...
	STENCIL PRINTER	The types of SMT printer machineare divided into three parts: 1. Manual printing table 2. Semi-automatic solder printer machine 3. Fully automatic ...
	About Auto Loader SL400	It is used for the board loading device of SMT production line circuit boards. It can be used with the standard material box to automatically send ...
	4th Floor, Building 5, No. 2, Huayi Road, Yuhang Street, Yuhang District, Hangzhou, China	Reflow soldering technology is widely used in the field of electronic manufacturing. The components on the various boards used in our computers are...
	IC Camera	SMDpick and place camerais mainly suitable for Trosntol A1 pick and place machine, which is responsible for the scanning and positioning of IC. It ...

Все товары поставщика

Похожие товары

	MaAnt M061 олово волочения иглы FPC разъем позолоченный припой бар	Продавец: Shenzhen Wikshu Technology Co.	Набор паяльных штифтов MaAnt M061 с золотым покрытием и легкой ручкой из углеродного волокна для ...
	High Hardness Linear Rail Flat Bed CNC Lathe	Продавец: Zhejiang Guoyu CNC Machine Tool Co., Ltd.	It can cut all kinds of turning surfaces by bicycle, such as conical surfaces, special surfaces, ...
	Automation Suction Cups	Продавец: Zhejiang Shijing Tools Co., Ltd. All Rights Reserved.	The ALUMINUM SUCTION CUP 6106 D is a versatile and reliable tool designed to handle various lif...
	Machinery	Продавец: O&K GROUP LIMITED	Okwishing supplies all kinds of Machinery. Okwishing () is a cross-border e-commerce platform de...
	Mini Excavator Carrier Roller for Kobelco SK045/SK045SR/SK50SR/SK70SR	Продавец: Xiamen Globe Truth (GT) Industries Co., Ltd	The carrier roller use 50Mn steel, after free forging into work-piece by a 560KG air hammer, comp...