Pillow Block Bearing

Pillow block bearing is an independent bearing unit that can provide support, load, and fix functions, and reduce friction resistance. Pillow block bearings are generally a unit composed of gray cast iron, ductile cast iron or cast steel bearing housings, rolling bearings and related sealing structures, fasteners, etc.

Pillow block bearing generally has a sealing mechanism and is filled with an appropriate amount of grease to ensure the normal operation of pillow block bearing during the lubrication cycle, and can provide relubrication oil injection holes.

Pillow block bearings are generally divided into two types, intergrated type and split type, which can be selected according to different installation occasions and requirements. The split bearing housing(also called as plummer blocks) is of upper and lower halves, and the bearings in the bearinghousing also have a split type or an integral type.

The different types of pillow block bearingsinclude ball bearings, roller bearings and tapered roller bearings, etc., depending on the load and work requirements.

The fixing method of pillow block bearings for saleand the shaft generally adopts a set screw, an eccentric sleeve, etc.

How to Choose Pillow Block Bearing?

Shaft diameter or bore of pillow block bearing: calculate the loads according to the customer's selection, and determine the shaft diameter or the bore of pillow block bearing with sufficient rigidity and deflection.

Shaft height position: Determine the height of the shaft center from the mounting base of pillow block bearing according to the structure size of the mechanism.

The shaft maximum speed: According to the working speed of the shaft, THB, as a professional pillow block bearing suppliers, determines whether the limit speed of the bearing with a seat can meet the application requirements.

The maximum load of the pillow block bearing: According to the load of the entire shafting system, the load of pillow block bearing would be verified, including the fatigue life of the bearing and the strength of the pillow blocks.

Misalignment performance: According to the misalignment information required in the shafting design, select the appropriate type and configuration of pillow block bearing.

The Installation of Pillow Block Bearing

Mounting steps for pillow block bearing:

Check whether the position tolerance of the connecting hole at the mounting position of pillow block bearing and the flatness of the fixed base surface of pillow block bearing meet the requirements.

Clean pillow block bearing and pillow block bearing to be installed on the base position and the surface of the shaft with a cleaning agent to keep the surface free of impurities and dust, and coat the surface with a layer of anti-rust oil.

Install the shaft into the bore of inserted bearing, during the installation process, only use tools such as a rubber hammer or nylon rod to strike the end face of the insert bearing's inner race to move, and do not strike other positions of other bearing housings.

After pillow block bearing is installed in the proper position of the shaft, fix pillow block bearing on the base, and tighten the bolts according to the specified torque requirements.

After installing the cheap pillow block bearingsat both ends, the shaft should be able to move axially between the bearing holes with a certain amount of force, which can ensure good alignment of pillow block bearing at both ends. Otherwise, it is necessary to reposition and adjust pillow block bearing.

Use appropriate torque to alternately tighten the eccentric sleeves on the inner ring of the bearing at both ends to ensure that the bearing is firmly fastened to the shaft.

Want to knowpillow block bearing priceor more, contact us.

Другие товары поставщика

	Self-aligning Ball Bearing	Self-aligning ball bearings have two rows of balls and two continuous tracks of deep groove ball type in the inner ring. The outer ring has a spher...
	KRV 19 PP/ CF 8 VBUUR Cam Follower	Specifications of KRV 19 PP/ CF 8 VBUUR Cam Follower Designation KRV19PP CF8VBUUR （Mass）m&a...
	Cross Cylindrical Roller Bearing	Crossed cylindrical roller bearingsselection must confirm below requirement. Rotation by inner ring or outer ring and the rotation speed Di...
	23168 CCK/W33 Spherical Roller Bearings	Specifications of 23168 CCKW33Spherical Roller Bearings Designations (Bearing with tapered bore) 23168CCK/W33 ...
	21314 E Spherical Roller Bearings	Specifications of 21314 ESpherical Roller Bearings Designations (Bearing with cylindrical bore) 21314E Principal dimensions ...

Все товары поставщика

Похожие товары

	Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series	Продавец: Uratech USA Inc	TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
	Uratech Tool scoot cart for 50 taper tool holders	Продавец: Uratech USA Inc	Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...
	3 in1 Decoiler Leveler Feeder	Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd.	3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f...
	NC Servo Feeder (0.1-3.0mm)	Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd.	NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of...
	Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage	Продавец: Uratech USA Inc	TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool...