Connecting Links
Chain Connecting Link, in other names like, double ring buckle, butterfly buckleand connecting ring, is mainly used to connect the chain, lifting ring and hooksin chain rigging. It is widely used in metallurgy, steel, electric power, port and other industries. Made by alloy steel or stainless steel, connecting linksare normally used with grade 8/grade 10 lifting chains or stainless steel chains to make one leg or multiple legs chain sling. In some special occasions, the connecting links are also used to connect two pieces chain together to get a longer distance.
Following steps below to assemble the Connecting Link,:
Step 1: Take a new piece of connecting chain. Visual check and be sure it’s in good condition for service. Take off the pin to separate the link as two parts.
Step 2: Put the chain link in one half link and the chain hooks or rings or other end fittings into the other half link, then cross the clevis head.
Step 3: Put the sleeve in the middle and insert the pin through the holes on clevis end and the pin sleeve.
Step 4: Drive the pin end with a soft hammer until the pin end is flush with the outside of the connecting link to get the pin locked tight.
There are many lifting equipment manufacturers, but we are one of the best choices for you. Contact us to buy lifting chainand know more.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Lift Table | TITANSUHE's lift table and lift platform are designed to solve your problem related to vertical transfer, height adjustment and lifts. Features wit... |
 |
G2130 Heavy Duty Anchor Shackle with Safety Pin | Structured with a safety bolt, this shackle offer a double safety. The bolt, nut and safety pin prevents accidental unscrewing during lifting opera... |
 |
Aluminum Gantry Crane | As a professionalmaterial handling equipment factory, TITANSUHE's aluminium crane overhead craneis made of Aluminum steel with knockdown design. Al... |
 |
Chain Hooks | TITANSUHE has a huge range of chain hoist hookfor Rigging and Tie Down. All our chain hooksare made of alloy steel with heat treatment for high str... |
 |
CT620 2 Ton Hoist Trolley | Featured with quick installation and low headroom, TITANSUHE's GCT/GCL 620 series chain hoist dollyhas many advantages compared with a regular hois... |
Похожие товары
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Продавец: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Продавец: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Продавец: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
