X120-D UV Spot Repair System
The X120-D UV Spot Repair Systemis mainly used for the repair of point defects in drainage pipes. According to different pipe diameters, the corresponding airbags are selected to accurately repair the damaged points. It is mainly composed of a main control system and an airbag. Its main characteristics are high efficiency, stability, precision, and controllability. It can repair a damaged point in 8 minutes.
X120-D UV Spot on RepairSystem Main Parts
Main Control System
Control function: The physical button can not only achieve the automatic take-up of the cable reel and adjust the take-up speed; but also control the air inflation and deflation as well as the switches of the ultraviolet lamp;
Status display: State of the light source; airbag type; pressure value; traveled distance of the airbag; states of air inflation and deflation; and restoration time;
Cable length: Length of the standard cable is 80m
Cable parameters: The cable interior adopts the air pipe of 6mm, four cores of 1.5mm and two wires of the diameter <15mm, showing the characteristics of water resistance, abrasive resistance, acid fastness, alkali resistance and corrosion resistance;
Automatic winding displacement: Ensure the regular distribution of the cable on the cable reel in the course of take-up and pay-off;
Counting: Adopt the high-precision encoder with the counting resolution ratio of 1mm ；
Power supply: AC220V input, with the maximum instantaneous power of 3KW. It’s suggested to use the 5KW generator for power
Dimension: 1135mm*660mm*590mm;
Weight: 120kg (including the weight of cable).
Packer
|
Packer Specification |
CA1 |
CA2 |
CA3 |
|
Packer length |
1410 |
1507 |
1697 mm |
|
Silica gel length |
1200 |
1200 |
1200 mm |
|
Silica gel diameter |
150 |
200 |
300 mm |
|
Packer minimum diameter |
172 |
261 |
361 mm |
|
Minimum pipe diameter for restoration |
200 |
300 |
400 mm |
|
Maximum pipe diameter for restoration |
300 |
400 |
600 mm |
|
Restoration length |
<600 |
<600 |
<600 mm |
|
Packer Weight |
Wuhan EasySightTechnology Co., Ltd, found in Nov 2000, in Wuhan, Hubei province, China, is a leading producer of pipe cleaning, inspection, and pipe rehabilitationequipment. In July 2015, Easy-Sight successfully became the first listed company on the New Third Board in the industry in China with a stock code of 833122. As a team with over 300 employees, Easy Sight is dedicated to providing a whole series of sewer industry products and systems to meet customers' different requirements.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
X5-HR Screw Type Crawler | The X5-HR all-terrain pipe inspection robot, a kind of sewer inspection crawler, consists of three parts: a spiral propeller crawler, a cable reel,... |
 |
X4 Pipe Sonar System | X4 Pipeline Sonar Sewer InspectionEquipment/System is mainly used for the detection of water-carrying pipes (full water or above 2/3 of the water l... |
 |
X5-HW Pipeline CCTV Inspection Robot | X5-HW pipeline CCTV inspection robot adapts to the pipe diameter range of 800mm-4000mm, and the detection distance can reach 2000 meters. It is a ... |
 |
Pipe Rehabilitation System | UV curing repair technology is the most effective and fast solution for pipe rehabilitation. Because of its high efficiency and low cost, UV curin... |
 |
Grab All | The Grab-All is designed to remove sticks, stones, concrete, and other debris. It's ideal for grease traps, septic tanks, lift stations, manholes, ... |
