HYDRAULIC CONTROL VALVE
As hydraulic irrigation valve, the drip irrigation flow control valveis actually similar to the pressure reducing valve. The sprinkler control valve mainly protects against the phenomenon of water hammer in the pipeline. It is generally installed at the beginning of the pipeline to control the water pressure of the pipeline to prevent the problem of water hammer. Commonly used drip irrigation systemcontrol valve structures are spring type, lever type and open type. How to choose depends on the pipeline water pressure range and size.
Manual Control Valve
Installed with main valve and 3-way control valve to be open/close controlling valve, easy to operate.
Size: 2" (Dn50), 3 (Dn80), 4" (Dn100).
Connection: Threaded / Flange.
Control Valve with Plus Solenoid Valve
Installed with main valve and solenoid to be open/ close controlling valve, distance operation by electrical signal.
Size: 2”(Dn50), 3”(Dn80), 4" (Dn100)
Electric Voltage: 24VAC(DC)/ 12VDC Latching
Valve Type: NC (Normally Closed) / NO (Normally Open), with 3 position 2 way
Connection: Threaded / Flange.
Pressure Sustaining Valve:
Installed with main valve, pilot and 3-way control valve to be pressure sustaining system. Remaining the ablove filter system to have enough pressure to flush when the filter system is in self-cleaning.
Size: 2”(Dn50), 3”(Dn80), 4”(Dn100).
Pressure Adjusting Range: 0.8-6.5bar (11-95psi).
Connection: Threaded / Flange.
Pressure Relief Valve:
Install with main valve, pressure relief pilot and 3-way control valve to be pressure relief system. Fixed after pump set or pressure relief valve for irrigation system, and open immediately release the pressure when pressure in system is too high.
Size: 2”(Dn50), 3" (Dn80), 4" (Dn100)，
Pressure Adjusting Range: 1.0-10bar (15-155ps).
Connection:Threaded / Flange
Level Control Valve:
Installed with main valve, float and 3-way control valve to be level controlling system. This valve can adjust the level of water pool in same location automatically although the flowing is changed constantly.
Size: 2” (Dn50), 3”(Dn80)，4”(Dn100).
Connection: Threaded / Flange
As one of irrigation system manufacturers, we will do our best to meet all the needs of customers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rubber Oil Suction Hose | Established in 1990, SUZHOU SEAPEAK CO., LTD. is one of theprofessional PVChose pipe manufacturersand hose fittings manufacturersin China. Covering... |
 |
PVC Air Hose | PVCAir Tube Characteristics: light –weight, wear resistance, erosion resistance, good flexibility Working Temperature: -5°C-65°C ... |
 |
PU/Polyurethane Layflat Hose | Polyurethane layflat hoseis made from thermoplastic polyether based polyurethane (TPU) covered and lined by high pressure around a circular woven j... |
 |
Шланг для распыления ПВХ Китай | PVC spray hose is composed of double polyester and three PVC layers, so can work under high working pressure. It is light, wearable, corrosion resi... |
 |
PVC Spray Hose | PVC spray hoseis composed of double polyester and three PVC layers, so can work under high working pressure. It is light, wearable, corrosion resi... |
Похожие товары
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Продавец: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Продавец: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Продавец: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
