Overload Limiter
The Weight Overload Limiterconsists of the sensor, computing amplifier, controlling actuator and load editor, etc. It is equipped with a display, controller and alarm device. When the crane lift items, the deformation of the sensor is converted into an electrical signal, which is amplified, and then the load weight is calculated. When the load weight reaches 90% of the rated weight, a warning signal is issued; When the load exceeds the rate, the power supply is cut off.
Advantages of Overload Limiter
It is widely used with all kinds of bridge cranes and gantry cranes.
Signal sensor inputs and a signal group of relay contactor outputs.
Artificial circuit adjusts built-in potentiometer to set zero and demarcate.
Specification of Overload Limiter
The Overload Limiter receives the force from the crane when lifting materials, then feed backs to the instrument to collect, contrast, read and judge, and then displays current weight and indicates the corresponding state. When the load exceeds the rated weight, the lifting circuit of the crane hook will be cut off immediately to make the crane not lift, in order to protect the crane and operator from being injured.
For 3 ~ 100t overhead crane and gantry crane
Complete sets: includes bearing seat sensor and monitoring instrument composition
Monitoring accuracy:
Display error ≤ ±3%
Action error ≤ ±3%
Comprehensive error ≤ ±5%
Application of Overload Limiter
The Overload Limiter is fitted on the winch wire rope drum shaft for overload protection. It is widely used with all kinds of overhead cranes and gantry cranes.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Portal Crane | Portal Craneis supported on the ground track or foundation by supporting legs on both sides, can run along the ground track, and can also pass rail... |
 |
Hoist Units | The Hoist Units have a capacity of up to 80 tons, it applies to some light duty working conditions. Including many kinds of a hoist, winch, and lif... |
 |
Double Girder Gantry Crane | Double Girder Gantry Cranes are usually assembled with electric hoists or winches or trolleys. As common lifting equipment, double girder gantry cr... |
 |
Crane Components | ZHONGGONG supplies a full range of components and parts for cranes and hoists, such as crane motors, crane brakes, wire rope, crane reducer, crane ... |
 |
Zhonggong Crane Solutions | Crane refers to multi-action lifting machinery that vertically lifting and horizontal handling heavy objects within a certain range. Heavy cranes a... |
Похожие товары
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Продавец: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Продавец: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Продавец: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
