ROCK REAMER
There is no fixed tooth shape and bearing for the hdd rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The hole opener bitis suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm.
Types Of Rock Reamer
Roller Cone Reamer
It means that the teeth using the hole openerare milled teeth, that is, the teeth milled out on the matrix of the roller, whose wear resistance is relatively poor. In order to improve its wear resistance, it is often coated with a hard alloy layer.
What Are Rock Reamer Made Of?
01
The Structure Of The rock river reamersIs Shown In The Figure
The rock reamer mostly uses the single tooth palm of the cone bit and the cone as one cutting edge,
02
With The Number Of Cutting Edges At Least 3
The cone reamer is composed of a rear centering plate, a rear baffle.
03
A Mandrel
A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm.
04
The Reamer Uses Welding Process To Connect And Fix The Components.
In the process of hole reaming, the screw drill provides torque and the drill provides tension.
As a professional drill bit factory, SML has high-quality drill bit wholesale. Welcome to contact us if needed.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
TCI Tricone Bit | Under the effect of the WOB and the twist of the drill string, the teeth of the tci drill bitare crushed and eaten into the rock, and at the same t... |
 |
STEEL PDC BIT | The drill body of the Steel PDC Bitis made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite pi... |
 |
PDC DRAG BIT | The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body... |
 |
PDC CUTTER | Artificial PDC cutter is composed of a layer of polycrystalline diamond cutters and carbide matrix, so it not only has the high hardness, high wear... |
 |
ROCK REAMER | There is no fixed tooth shape and bearing for the hole opener bit, so it is necessary to select appropriate tooth shape and bearing structure accor... |
Похожие товары
 |
GT-FM24-PLC Разливочная машина (3+9+9+3) Тройная направляющая трубка | Продавец: Чжаосин-гуретт технолоджис лимитед | * Описание GT-FM-PLC (тройные направляющие трубки на станции 6-48)Машина для наполнения порошком ... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | Продавец: Eurion Automation Co., Ltd. | Система сервоконтроля высокой точности: использует платформу управления на основе промышленного к... |
 |
GT-FM18-PLC Разливочная машина (8+2+8) Тройная направляющая трубка | Продавец: Чжаосин-гуретт технолоджис лимитед | * Описание GT-FM-PLC (тройные направляющие трубки на станции 6-48)Машина для наполнения порошком ... |
 |
Разливочная машина на 48 станций GT-FM48 | Продавец: Чжаосин-гуретт технолоджис лимитед | * ОписаниеРазливочная машина FM подходит для наполнения трубчатых нагревателей большой длины и ра... |
 |
8-станционная разливочная машина GT-FM8 | Продавец: Чжаосин-гуретт технолоджис лимитед | * Описание Разливочная машина FM подходит для наполнения трубчатых нагревателей большой длины и р... |
