Manifold
Overview of china manifold
A manifold is a combination of multiple pipes. The manifold includes gate valves, pipelines, pipe fittings, pressure gauges, and electronic sensing, hydraulic control systems and other accessories. There are many types of manifolds that have different uses depending on the construction. Common manifolds include throttle manifolds, pressure manifolds, ring manifolds, kill manifolds, etc.
As a company that enjoys competiveness among other oil and gas equipment manufacturers,Saigao has its own manifold product series which consists of products such as choke manifold, cement manifold, filter manifold and frac manifold.
Oilfield ManifoldFor Sale
Choke Manifold
Kill Manifold
Marine Standpipe Manifold
Cement Manifold
Frac Manifold
Sand Filter Manifold
Filter Manifold
The Main Functions of the Manifold System
Provide an interface for production pipelines, submarine pipelines and oil wells;
Combine oil and gas for transport.
Distribute electricity and water pressure systems.
Support airfoil hubs, pipeline hubs and umbilical hubs.
Support and protect all piping and valve systems.
Provide a support point for the manifold module during the installation and recovery process; provide a support platform for the ROV during ROV operation.
The manifold and the well are completely independent in structure, and the oil well and the oil pipeline are connected to the manifold through the jumper. The management system consists of a manifold, a manifold support structure and an infrastructure. The manifold supports the junction between the structural manifold and the infrastructure.
The manifold consists of pipes, valves, control modules, flow meters, etc. On the chassis of the pipeline arrangement in the manifold, the oil and gas produced by the chassis well and the satellite well are collected by the manifold and piped to the platform. The injected water from the platform is distributed to each injection well through the manifold.
The manifold support structure consists of a frame made of pipe diameter and section steel. It functions to: provide guidance for drilling; provide a base for equipment installed under the underwater pipe; provide a carrier for underwater pipe sinking; protect the underwater pipe The exchange is not destroyed.
Most of the basic structure is in the form of a hydraulic anchor, and its structure is a large diameter steel structure.
There are many oil well equipment manufacturers,but we are one of the best choices for you.
If you are looking for a reliable manifold supplier, don't hesitate to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Hydraulic Liner Hanger Polished Bore Receptacle | polished bore receptacle liner hangerMated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency sealing. The p... |
 |
Cementing Tools | Cementing is an important task in the drilling process. In drilling operations, there must be at least two cementing (production wells) and up to 4... |
 |
Choke Valve | Choke valve oil and gasis a valve that controls the flow of a fluid by changing a throttle section or a throttle length. The choke valve and the ch... |
 |
Hydraulic Liner Hanger Polished Bore Receptacle | Hydraulic Liner Hanger Polished Bore ReceptacleMated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency seal... |
 |
Key Seat Wiper | Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could... |
