DPM-6000 PM Monitor PM2.5/PM10
Overview
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 atmospheric particulate monitor with high accuracy, reliability, stability and economy. It can measure PM10, PM2.5 and dust particles of other cut sizes, widely applied in inhalable particles concentration detection in environmental atmosphere monitoring.
Principle Of DPM-6000 PM MonitorPM2.5/PM10
The monitoring principle of the pm measuring deviceis mainly based on enrichment technology of atmospheric particulate and beta ray attenuation method. The instrument concentrates on particulate matters whose aerodynamic equivalent diameter is smaller than 2.5/10μm on the rolled filter membrane. The instrument adopts low-radiation 14C as a radioactive source. The emitted Beta-ray passes through the filter membrane with contaminants and will be received by the detector. The detector is composed of a photo-multiplier tube (or Geiger detector), plastic scintillator and counter. The thickness of enrichment can be analyzed quantificationally according to Beta-ray energy that detector received, then the PM2.5/10 concentration in the air can be calculated.
Features Of DPM-6000 PM Monitor PM2.5/PM10
The design of the gas path keeps filter paper, a radioactive source and detector immovable during enrichment and measurement, ensuring a good lower detection limit.
US EPA standard beta ray attenuation method, which spares the complicated operations of TEOM, such as manually replace filter paper and weight. Compared to the light scattering method, it has higher measurement accuracy.
Cutter, based on simulation verification of aerodynamics, will provide a various selection of accurate particle.
Sizes: PM1, PM2.5, PM10, TSP.
Sampling flow is measured by a mass flow sensor and corrected with collected ambient temperature and pressure to get the sampling flow of the field.
Use C14 source which is of low-density, low activity, and long half-life to realize stable measurement. No special protection is needed. Reliable and safe.
Flexible paper-pressing structure. Mechanical driving design is simple and reliable; greatly reduce paper breaking and paper jam and avoid the error caused by the moving of filter paper.
The pipeline heating system is used to eliminate interference from ambient humidity and make the detector fit into sudden.
Flow control system with precise closed-loop feedback; stable sampling flow and small error.
Various external ports, such as RS232/RS485, 4~20mA and etc.
Low maintenance frequency, once a year.
Specification Of DPM-6000 PM Monitor PM2.5/PM10
|
Measuring principle |
Beta ray attenuation method |
|
|
Performance Index |
Measuring Range |
0~1000μg/m3³or 0~10000μg/m3 (optional) |
|
Radioactive Source |
14C (carbon-14), radioactivity≤60μCi |
|
|
Accuracy |
≤5% |
|
|
Display Resolution |
1μg / m3 |
|
|
Lower Detection Limit |
5μg / m3 |
|
|
Flow Error |
≤±2% (generally set at 16.67L/min) |
|
|
Sampling Flow Stability |
≤±2% working point flow/24h |
|
|
Sampling Period |
≤1h (time is settable) |
|
|
Sampling Flow |
Default 16.67L/min |
|
|
Parallelism |
PM10≤10%，PM2.5≤15% |
|
|
Filter Paper Tape |
Filter Paper Tape |
Glass fibre, inner diameter:40mm,width: 30mm, service time 1 month (work period 1 h) |
|
Interface For. |
I / O |
Rs232, RS485, 4-20mA, GPRS (optional) |
|
Data Storage |
One year |
|
|
Working Condition |
Cuttingheader |
Ambient temperaure (-40~50)℃, ambient pressure (80~106)kPa |
|
Detector |
Ambient temperature (5-40)℃, ambient pressure (80-106)kPa, humidity (≤90%) |
|
|
Power Supply |
AC (220 ± 22) V, (50 ± 1) Hz |
|
|
Dimension & Weight |
483×407×322(mm)(L×W×H); Monitor 30kg, Pump 8kg |
|
Application Of DPM-6000 PM Monitor PM2.5/PM10
Inhalable particle real-time monitoring in industry,, construction, residential district and etc.
Environment assessment, permission, and pollution forecast and pre-warning.
Ambient air quality monitoring and mobile air monitoring experimental station.
Occupational disease research, and long-term background environment research.
Secondary emission monitoring (coal storage area, wharf, etc.).
Hangzhou Zetian Technology is committed to the integrity, strength and quality of our water quality testingproducts. We're internationally recognized. Welcome you to visit us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
EM-5 Flue Gas Analyzer | Overview EM-5 series flue online gas analyzeris a series of self-developed gas analysis products for online gas analysisof domestic as well as for... |
 |
LGT-100 Cross Stack & In-Situ Laser Gas Analyzer | Overview LGT-100 in-situ gas analyzer is a flameproof in-situ probe-type tunable laser gas analyzer for industrial online analysis and environmenta... |
 |
EM-5P Portable Flue Gas Analyzer | Overview Of EM-5P Portable Flue Gas Analyzer EM-5P portable flue gas analyzersystem mainly consists of gas monitoring sensors (SO2, NOx, CO, CO2), ... |
 |
EQMS-3000B Environmental Quality Monitoring System | Overview According to the status and characteristics of construction sites and production industry generated pollution, applying more sophisticate... |
 |
WDet-7000 Integration Water Quality Online Analyzer | Overview Of WDet-7000 Integration Online Multi Parameter Water Quality Analyzer WDet-7000 multi parameter water quality analyzeris a high-level in... |
Похожие товары
 |
Flexo Printing Machine | Продавец: RUIAN LOYAL MACHINERY CO.,LTD | In the 1980s, flexographic printing technology developed rapidly. The performance of flexographic... |
 |
LJ-Spray Printing Embroidery Series | Продавец: Zhejiang Lejia Electrical Machinery Co., Ltd. | LJ-Spray Printing embroidery machine Series Rely on technology research and development, Lejia co... |
 |
LJ-928 Sequin High speed computerized embroidery machine | Продавец: Zhejiang Lejia Electrical Machinery Co., Ltd. | Sequin/Beads Embroidery Machine Series uses lock stitches embroidery without any falling off of... |
 |
Lejia LJ-1204 4 heads Cap embroidery machine | Продавец: Zhejiang Lejia Electrical Machinery Co., Ltd. | LJ- Cap/T-shirt/Tubular series of embroidery machine adopts overhanging type hook base, integrate... |
 |
LJ-Cap/T-shirt/ Tubular Series | Продавец: Zhejiang Lejia Electrical Machinery Co., Ltd. | LJ- Cap/T-shirt/Tubular series of embroidery machine adopts overhanging type hook base, integra... |
