.

Покрасочная камера HC650

Specification(European design) Outside Size:(mm) 7110 x 5570 x 3810 mm (L x W x H) Inside Size:(mm) 7000 x 4000 x 2800 mm (L x W x H) Basement Basement Full metal foundation, full grids, the grids are suppressive type of steel grating instead of traditional twisted steel for the cross bar steel grating. The biggest features for it are beautiful, durable and better force bearing. Surface area of foundation 27 M² (full grids) Metal basement 350mm height, the ventilation effect is better than traditional spray booth. Drive-in Ramps 3Units, each size: 2000x1030mm, diamond plate construction Foundation and Floor Wallboard and Roof Panel Adopt high quality double construction fireproof insulation EPS panel, thickness: 50mm 3-Folded Entrance Door With Safety Glass Window 1 set, size: 3200x2700 mm(B x H), size is bigger than traditional spray booth -Operator’s Door With Safety Glass Window Big opening:800x2000mm (B x H),hand-made, tempering glass observation window Light System Ceiling Lighting 8Units, each4×36w, total 1152W , the grade of lighting box’s dustproof and waterproof reach IP54 grade. Side Lighting 8Units, each2×36W, total 576W, grade of lighting box’s dustproof and waterproof reach IP54 grade. Brightness ≥1000 LUX Filtration System Pre-filters EU3 grade pocket filter system, filtration effect is much better Ceiling Filters EU5 grade high efficient filter Bottom filter & exhaust filter Fibreglass paint-stop filter Ventilation System Inlet fan (Direct Drive Motor) Adopt big impeller turbo fan 7.5KW ,380V,50HZ,CE Outlet fan (Direct Drive Motor) Adopt big impeller turbo fan 7.5KW ,380V,50HZ,CE Painting and baking exchange system Solenoid valve+ pressure adjustment control cylinder driven damper exchange Fan Capacity 25.000m³/h Air Flow Speed 0.23 m/s in empty booth, 0.25-0.35m/s in loaded booth Heating System Heating Exchanger Adopt high efficient heat-resistant stainless steel as cycling heat exchanger Heating Exchange Capacity 200KW(260.000Kcal/H) Burner Model Adopt Italy RIELLO diesel burner RG5S, (260.000kal/H), quicker heating and much better effect, more rest assure for quality Heating time 3-5 minutes( from 20°C to 60°C) under baking status, the max baking temperature is 80°C Control board Control system Standard Y/Δ step-down start control system PLC controller Yes, PLC control, more reliable and lower breakdown rate Pressure testing The pressure gauge indicate the pressure inside cabin Function Painting, warm painting, baking, emergency stop switch, alarm indication, failure indication, over-temperature alarm indication, baking delay stop protection

Отправить запрос, связаться с поставщиком

Кому: HC coating equipment manufacturing Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Покрасочная камера HC630-1
Покрасочная камера HC630-1 Specification(European design) Outside Size:(mm) 7010 x 5570 x 3810 mm (L x W x H) Inside Size(mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation an...
Покрасочная камера HC630
Покрасочная камера HC630 Specification(European design) Outside Size:(mm) 7010 x 5570 x 3810 mm (L x W x H) Inside Size(mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation an...
Покрасочная камера HC620
Покрасочная камера HC620 Specification(European design) Outside Size: (mm) 7010 x 5570 x 3610 mm (L x W x H) Inside Size: (mm) 6900 x 4000 x 2800 mm (L x W x H) Foundatio...
Покрасочная камера HC920
Покрасочная камера HC920 Specification(European design) Outside size:(mm) 7110 x 5800x 3810(L x W x H) Inside size:(mm) 7000 x 4000 x 2800(L x W x H) Foundation and floor ...
Покрасочная камера HC620
Покрасочная камера HC620 Specification(European design) Outside Size:(mm) 7010 x 5570 x 3610 mm (L x W x H) Inside Size:(mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation ...
Все товары поставщика

Похожие товары

Diesel Injector Nozzles G3S4
Diesel Injector Nozzles G3S4 Продавец: 828487 Diesel Injector Nozzles G3S4 Alen from China lutong,if you need, contact me. Whats--App Alen-...
Diesel Injector Nozzles G3S3
Diesel Injector Nozzles G3S3 Продавец: 828487 Diesel Injector Nozzles G3S3 Alen from China lutong,if you need, contact me. Whats--App Alen---...
Diesel Injector Nozzles G3S29
Diesel Injector Nozzles G3S29 Продавец: 828487 Diesel Injector Nozzles G3S29 Alen from China lutong,if you need, contact me. Whats--App Alen...
Diesel Injector Nozzles E384
Diesel Injector Nozzles E384 Продавец: 828487 Diesel Injector Nozzles E384 we are one of the specialist Fuel Injection System suppliers and co...
Diesel Injector Nozzles E374
Diesel Injector Nozzles E374 Продавец: 828487 Diesel Injector Nozzles E374 we are one of the specialist Fuel Injection System suppliers and co...