.

SMC Antenna Reflector Mould

The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better properties of SMC material can boost the accuracy of satellite antenna. The good performance of SMC antennais comparable to a metal one.

Features of antenna SMC

(1) High precision, high efficiency, and high gain.

The design of SMC antenna mold takes consideration of shrinkage ratio of the material and molding shrinkage rate, so the SMC antenna reflective surface has a smaller shape from the original design paraboloid after molding. SMC antenna comes with small reflective surface.

(2) Corrosion resistance

SMC is non-metal dielectric composite material, has good acid resistance, water resistance and corrosion resistance.

(3) long life

The service life of SMC molded antennas is generally more than 15 years; PROMLIN's prototype SMC molded antennas in 1985 are still working normally, and they have been subject to typhoons and heavy rain every year.

(4) Strong wind resistance

The design of antenna adopts multiple longitudinal and circumferential rib structures. It can withstand a wind load of 45 m/s.

(5) Special reflective layer technology

A metal aluminum mesh is applied on the reflective surface, which can reflect electromagnetic waves and insulate the atmosphere, and plays a good protective role.

(6) Good consistency, no deformation, easy to transport and install

Membrane pressure technology adopted delivers good consistency, no deformation, and make it easy to transport and install.

SMC antenna mold specification

Product name

SMC Satellite Dish Antenna Mould

Product Material

PP, PC, PS, PA6, POM, PE, PU, PVC, ABS, PMMA etc

Mould cavity

L+R/1+1 etc

Mould life

500, 000 times

Mould testing

All of the moulds can be well tested before the shipments

Shaping Mode

Pressure mold

Design of SMC antenna

Draft angle: draft angle should be enough to allow smooth demoulding without damage.

Round angle: Stress is prone to accumulate the the right angle. A round angle can not only disperse stress, but also give a aesthetic touch, and serves as protection in quenching and working.

Quality Control Procedures for SMC Antenna Mould

Inspect steel hardness and dimension

Inspect Electrodes

Inspect dimension of parts

Inspect before assembly

Inspect trial report and samples

Inspect before shipment

Custom Service for SMC Antenna

Meet your specific needs

Experts and technicians available to give professional advice on your custom needs

Optimized quality possible.

We use BMC composite, bulk molding compound and sheet molding compound as material, which is high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, highstrength, acid and alkali resistance, waterproof, moisture-proof, low energy consumption, no waste, no need to clean the mold cavity.

If you want to know more kinds of bmc compound, please visit our website.



Отправить запрос, связаться с поставщиком

Кому: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Electric Control Box
Electric Control Box BMC/SMC PRODUCTS BMC/SMC Motor SMC Cable Braket High-Voltage Electrical Products Low-Voltage Electrical Products Auto Parts And Accessories Ca...
Auto Parts And Accessories
Auto Parts And Accessories Frame Moulding Features Mainly for pressure molding, the cavity pressure should be considered as small as possible when designing the parting sur...
BMC, SMC, GRP, GFK Ceiling
BMC, SMC, GRP, GFK Ceiling Ceiling is a kind of decoration on the top of living environment. In short, it refers to the ceiling decoration, is an important part of interior d...
BMC, SMC, GRP, GFK Ceiling
BMC, SMC, GRP, GFK Ceiling Ceiling is a kind of decoration on the top of living environment. In short, it refers to the ceiling decoration, is an important part of interior d...
Insulation Mold
Insulation Mold Mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner and the parting surface. Sinc...
Все товары поставщика

Похожие товары

Nissan Maxima 2009-2013 Control Arm
Nissan Maxima 2009-2013 Control Arm Продавец: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN MAXIMA 2009-2013 CONTROL ARM, with one ball joint and two bus...
Nissan Maxima 1996-1999 Control Arm
Nissan Maxima 1996-1999 Control Arm Продавец: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN MAXIMA 1996-1999 CONTROL ARM, with one ball joint and two bus...
Nissan Kicks 2018-2021 Control Arm
Nissan Kicks 2018-2021 Control Arm Продавец: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN KICKS 2018-2021 CONTROL ARM, with one ball joint and two bush...
Nissan Juke 2010-2022 Control Arm
Nissan Juke 2010-2022 Control Arm Продавец: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN JUKE 2010-2022 CONTROL ARM, with one ball joint with two bush...
Nissan Control Arm
Nissan Control Arm Продавец: WENZHOU SAFE AUTO PARTS Co.,Ltd NISSAN sells well worldwide, and our firm has produced several control arms for NISSAN vehicles, ...