FORD CHB005 HYDRAULIC CLUTCH BEARING

Model		SIZE(CM)
CHB005		21	14	12

How to Choose Ford Ranger Throwout Bearing?

grease

The selection of grease is generally based on the speed, temperature resistance, noise requirements and starting torque of the bearing.

type

If the bearing cannot meet the requirements, the customer should be advised to change the model as soon as possible.

clearance

Must ask the use conditions of the bearing, which bearing speed, temperature, with tolerance are directly related to the choice of bearing clearance.

seal type

Bearing lubrication can be divided into oil lubrication and grease lubrication. Oil lubrication bearings are generally selected form bearings, grease lubrication bearings are generally selected dust cover or rubber seal seal. Dustproof cover is suitable for high temperature or the use of good environmental parts, the seals are divided into contact.

Notes for Using Ford Clutch Bearing

Clutch release bearing is a relatively important part of the car, if poor maintenance failure, not only will cause economic losses, and disassembly and installation of a considerable trouble, requiring a lot of man-hours. Therefore, it is important to find out the cause of the clutch release bearing failure, and to maintain and repair it reasonably in use to extend the life of the release bearing, improve labor productivity and achieve better economic benefits.

According to the operation regulations, avoid half-engagement and half-disengagement of the clutch, and reduce the number of times the clutch is used.

Pay attention to maintenance, regularly or during the annual inspection and maintenance, let the butter soak through with the steaming method so that it has sufficient lubricant.

Pay attention to the leveling of the clutch release lever and ensure that the spring force of the return spring meets the requirements.

Adjust the free travel so that it meets the requirements (30-40mm) and prevent the free travel from being too large or too small.

Minimize the number of engagement and disengagement to reduce the impact load.

Step lightly and easily so that it engages and separates smoothly.

As a china spare parts manufacturer, we can offer types of related products for sale, if you are interested, please contact us.

Другие товары поставщика

	CHEVROLET CHB002 HYDRAULIC CLUTCH BEARING	Model SIZE(CM) CHB002 21 14 10 OEM Numbering of CHEVROLET CHB002 Hydraulic Clutch Bearing ...
	Clutch Actuator	The truck uses compressed air to disengage and recombine the amt clutch actuator to complete the start and shift gears. A concentric pneumatic clut...
	LAND ROVER CHB053 HYDRAULIC CLUTCH BEARING	OEM Numbering ofLAND ROVER CHB053 Hydraulic Clutch Bearing Factory Number Cross Interchange Type Relevance Luk 510008110 ...
	RENAULT CHB020 HYDRAULIC CLUTCH BEARING	OEM Numbering ofRENAULT CHB020 Hydraulic Clutch KitParts Factory Number Cross Interchange Type Relevance SACHS 3182600129 Direct ...
	MG CHB063 Hydraulic Clutch Bearing	Model SIZE(CM) CHB063 40 18 9 OEM Numbering ofMG CHB063 Hydraulic Clutch Bearing Facto...

Все товары поставщика

Похожие товары

	Armored Door Locks	Продавец: Wuyi Jiamin Locks Co., Ltd	JM-55 Door handles Entrance 1, Material: Iron plate+ aluminum lever2, Center distance: 68mm3, P...
	nozzle	Продавец: DOUBLE WIN INTERNATIONAL GROUP LIMITED	Qinhuangdao ShuangSheng Machinery Co.,Ltdhas been supply marine spare parts for customers for mor...
	MAN 16/24, 21/31,23/30,marine diesel engine parts	Продавец: DOUBLE WIN INTERNATIONAL GROUP LIMITED	秦皇岛双盛机械有限公司为客户供应船舶备件已超过10年。我们为全球客户提供船用柴油机备件、压缩机、滤油机、涡轮增压器和泵等。 主要产品：喷油嘴、柱塞及缸筒、出油阀、缸盖、缸套、活塞、活塞销、活塞...
	High Voltage PTC Heater for Electric Vehicle	Продавец: Shanghai Pake Thermistor Ceramics Co., Ltd.	Применение:Он используется для нагрева воздуха. Характеристика:Высокая скорость нагреваДуальное ...
	Solid Tire For Mini Wheel Loader	Продавец: Zhejiang Tongchao Industry and Trade Co., Ltd.	Solid Tire For Mini Wheel Loader（） It is composed of low heating and cutting-resistant materials...