ChangSheng 800W (Φ65*195) Woodworking Advertising Water-Cooled Spindle Motor
|
Spindle model: |
GDZ65-800A |
|
Dimensions: |
Φ65*195Φm/m |
|
Spindle speed: |
24000RPM |
|
Spindle power: |
|
|
Spindle voltage: |
220V |
|
Spindle frequency: |
400HZ |
|
Spindle bearing: |
4 bearings |
|
cooling method: |
Water cooling |
|
Chuck nut: |
ER11A |
|
Spindle current: |
/ |
Features Of ChangSheng 800W (Φ65*195) Woodworking Advertising Water-Cooled Spindle Motor
The changsheng spindlemotor should be used with the inverter and the specifications and parameters of the inverter should match up with the parameters of the spindle motor. If the settings are not correct, this water-cooled spindle motor may get burned.
Before using, the water-cooled spindle motor must ensure that the cooling circulation system can work normally, and it is strictly prohibited to use the spindle without cooling water.
During the storage and transportation of the spindle motor, the state of the high-speed grease inside the bearing will change. Thus, the customer should run the spindle motor at a low speed for its first use.
As one of china cnc kit suppliers, we can offer types of cnc machine accessoriesfor sale, anything you need, please leave us a message.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
65mm-spindle Holder Spindle Clamp | Product name: Spindle holder spindle clamp Brand: HYCNC Model: 65mm diameter Material: Indus... |
 |
CNC Lubrication System | There are two types of lubrication pumps for CNC machines: manual oil pump and automatic oil pump. The automatic oil pump has 1 litre, 1.5 litres a... |
 |
CNC Parts | WHERE THERE IS A CNC MACHINE, THERE IS A HYCNC PRODUCT. Jinan Hongyang CNC machinery Co., Ltd. is committed to providing a one-stop purchase servic... |
 |
Automatic Tool Changer | CNC router parts tool changer(ATC), or the so-called CNC tool changer, is mainly used on automatic tool change machines. At present, there are in t... |
 |
CNC 15pin Handwheel Controller | CNC Hand Controller Product Name: Cnc 15pin Handwheel Controller Operating Voltage: 5v、12v、24v Applicable Syst... |
