Auto Car Thermal Expansion Valves

• 

The auto ac expansion valve of the automotive air conditioner is installed at the entrance of the evaporator, and has two main functions.

Throttle effect. After the high temperature and high pressure liquid refrigerant is throttled through the orifice of the auto ac expansion valve, it becomes a low temperature and low pressure mist refrigerant, which creates conditions for the evaporation of the refrigerant.

Control the flow of refrigerant. The liquid refrigerant entering the evaporator, after passing through the evaporator, the refrigerant evaporates from liquid to gaseous state, absorbs heat, and reduces the temperature inside the car. The car ac expansion valve controls the flow of refrigerant to ensure that the outlet of the evaporator is completely gaseous refrigerant. If the flow rate is too large, the outlet contains liquid refrigerant, which may enter the compressor and cause liquid shock. If the flow rate is too small, the evaporation will be completed in advance, resulting in insufficient cooling.

Key Features of A/C Expansion Valves

Advanced structure of a dual-flow balanced orifice.

Stable superheat degree to make the system run stably.

Dual-flow thermal expansion valve saves the number of expansion valves, check valves and solenoid valves in the refrigeration system.

Suitable for various working needs such as refrigeration and air conditioning.

Two-way balanced flow port makes the static superheat change with the change of the condensing pressure or the pressure drop through the valve port.

Evaporation temperature range: -40℃ to +10℃.

Suitable for R12, R22, R134a and other media.

How To Test Car AC Expansion Valve?

Connect the car ac thermal expansion valveto the high pressure side and the low pressure side of the branch pressure gauge according to the high pressure and low pressure, then connect the intermediate hose to the injection valve and inject the refrigerant. Take a water tank, put the capillary of the car expansion valveinto it, observe the water temperature in the water tank and the pressure of the high pressure gauge, operate the high pressure manual network, make the pointer of the high pressure gauge reach 490kpa, and the refrigerant will be discharged from the car expansion valve in a gaseous state. If the intersection of the water temperature and the high pressure gauge pressure is between the two curves, the car expansion valve is ok.

The auto ac expansion valve is actually a pressure reducing valve, and the flow rate determines the cooling effect. Therefore, its opening size is strictly controlled. In general, blockage is the most common failure. If it is blocked, the pressure gauge will find that the high pressure is too high and the low pressure is too low. If the opening is too large, the high pressure is low and the low pressure is high. The standard amount of refrigerant, when the engine is idling, the air pressure of the car should be 0.1 ~ 0.25 MPa. If the low pressure is lower than or higher than this range, it means that the opening of the expansion valve is not good.

As one of car spares suppliers, we can offer kinds of related products for sale, if you have needs, please contact us.

Другие товары поставщика

	Turn Signal Switches	The clockwise lever of the aftermarket signal light switchturns right, the counterclockwise lever turns left, pushes the lever outwards for high be...
	Air Conditioning Expansion Valve Application	The high temperature and high pressure refrigerant from the condenser enters into the expansion valve, due to the reduction of the internal section...
	SRS Supplemental Restraint System	SRS supplemental restraint systemconsists of an airbag and an inflating mechanism to form an integral airbag module, a collision supplemental restr...
	Fuel Level Sensors	The fuel sensor level uses the principle of the magnetic field generated by the ferrite magnet to control the on-off of the reed switch, and conve...
	Vehicle Speed Sensors	As the information source of the automotive electronic control system, the vehicle speed sensor is the key component of the automotive electronic c...

Похожие товары

	Инжектор 320-0690 дизельного топлива Perkins высокой эффективности 2645A749 для двигателя Caterpillar C6.6	Продавец: DIP (ДИЗЕЛЬНЫЕ ДЕТАЛИ) УСТАНОВКИ
	Инжектор 320-0677 дизельного топлива Perkins высокой эффективности 2645A746 для двигателя Caterpillar C6.6	Продавец: DIP (ДИЗЕЛЬНЫЕ ДЕТАЛИ) УСТАНОВКИ
	Горячая продажа 7W7026 Форсунка дизельного топлива 7W-7026 Карандашная насадка для двигателя Caterpillar 3406	Продавец: DIP (ДИЗЕЛЬНЫЕ ДЕТАЛИ) УСТАНОВКИ	Whatsapp/ со мной Pencil Nozzle 8N7005 Pencil Nozzle 4W7015 Pencil Nozzle 4W7...
	Горячая продажа 7W7031 Форсунка дизельного топлива 7W-7031 Карандашная насадка для двигателя Caterpillar 3406	Продавец: DIP (ДИЗЕЛЬНЫЕ ДЕТАЛИ) УСТАНОВКИ	Whatsapp/ со мной Pencil Nozzle 8N7005 Pencil Nozzle 4W7015 Pencil Nozzle 4W7...
	How to Create an Efficient Warehouse Returns Process?	Продавец: HAI ROBOTICS	Hai Robotics is committed to helping customers achieve an efficient return process in warehouse. ...