.

Покрасочная камера HC910

Specification(European design)Outside size: 7110 x 5570 x 3810 mm (L x W x H) Inside size:(mm) 7000 x 4000 x 2800 mm (L x W x H) Foundation and floor Foundation Adopt galvanized bending forming, more durable and strong. Full grids, the grids are suppressive type of steel grating instead of traditional twisted steel for the cross bar steel grating. The biggest features for it are beautiful, durable and better force bearing. Surface area of foundation 27 M²(full galvanized grids) Metal basement 350mm height, the ventilation effect is better than traditional spray booth. Drive-in ramps 3 big drive-in ramps, each size: 2000x1030mm, diamond plate structure. Wall and door Wallboard and roof panel High quality double construction fireproof insulation rock wool panel, thickness: 50mm 3-folded entrance door with safety glass window 1set,size: 3200x2700 mm(B x H),tempering glass observation window , size is bigger than traditional spray booth. Operator’s door with safety glass window 800x2000mm(B x H)the top of service door installs door closer to close the door automatically Spray gun hanging system Install hanging arm in cabin, convenient for operators to hang spray gun, etc.Lighting Ceiling lighting 8units,each 4 x 36 W,total 1152w , adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach IP54 grade. Side lighting 8units,each 2 x 36 W,total 576w, adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach to IP54 grade. Brightness ≥1000 LUX Filtration system Pre-filters EU3 grade pocket filter, filtration effect is much better Ceiling filter EU5 grade high efficient filter Bottom filter and exhaust filter Fibreglass paint-stop filter Ventilation system Inlet fan (Direct drive motor) Adopt big impeller turbo fan,Germany SIEMENS Brand motor, 7.5KW,6-pole motor, 970RMP, 380V,50HZ Outlet fan(Direct drive motor) Adopt big impeller turbo fan,Germany SIEMENS Brand motor, 7.5KW,6-pole motor, 970RMP, 380V,50HZ Painting and baking exchange system Solenoid valve+ pressure adjustment control cylinder driven damper exchange Total fan capacity 25.000m³/h Air flow speed in cabin Inverter adjustment, 023m/s in empty both, 0.25-0.35m/s in loaded booth Heating system Heating exchanger material Adopt high efficient heat-resistant stainless steel as cycling heat exchanger Heating exchanger capacity 200KW(260.000Kcal/H) Burner model Adopt Italy REILLO two ranges diesel burner RG5D(260.000kcal/H),quicker heating and much better effect, more rest assure for quality Heating time 3-5 minutes( from 20°C to 60 °C) under baking status, the max baking temperature is 80°C Control system Control system Inverter control system PLC controller Yes, PLC control, more reliable, lower breakdown rate Human-computer interface touching screen control system Yes, touching screen control, easier to operate Inverter control Inverter control , more energy-saving, more economic Function Painting, warm painting, baking, leveling, emergency stop switch, inverter, pressure adjust balance, alarm indication, failure indication, over-temperature alarm indication, baking delay stop protection

Отправить запрос, связаться с поставщиком

Кому: HC coating equipment manufacturing Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Покрасочная камера HC660
Покрасочная камера HC660 Specification (European Design) Outside Size:(mm) 7110 x 5800x 3810(L x W x H) Inside Size:(mm) 7000 x 4000 x 2800(L x W x H) Foundation and Floo...
Покрасочная камера HC620
Покрасочная камера HC620 Specification(European design) Outside Size: (mm) 7010 x 5570 x 3610 mm (L x W x H) Inside Size: (mm) 6900 x 4000 x 2800 mm (L x W x H) Foundatio...
Покрасочная камера HC900
Покрасочная камера HC900 Specification(European design) Outside size: 7010 x 5570 x 3810 mm (L x W x H) Inside size: 6900 x 4000 x 2800 mm (L x W x H) Foundation and floor...
Покрасочная камера HC630-1
Покрасочная камера HC630-1 Specification(European design) Outside Size:(mm) 7010 x 5570 x 3810 mm (L x W x H) Inside Size(mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation an...
Покрасочная камера HC620
Покрасочная камера HC620 Specification(European design) Outside Size:(mm) 7010 x 5570 x 3610 mm (L x W x H) Inside Size:(mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation ...
Все товары поставщика

Похожие товары

Non-Sparking Hand Saw 35x700mm Overall Length
Non-Sparking Hand Saw 35x700mm Overall Length Продавец: Hebei Sikai Safety Tools Manufacturing Co.,Ltd Non-Sparking Hand Saw 35x700mm Overall Length Applications OfNon-Sparking Hand Saw : Non-sparki...
Impact Sockets, 6-Point, 1-1/4 Drive
Impact Sockets, 6-Point, 1-1/4" Drive Продавец: Hebei Sikai Safety Tools Manufacturing Co.,Ltd Impact Sockets, 6-Point, 1-1/4" Drive Applications ofImpact Sockets, 6-Point, 1-1/4" Drive,Non-s...
Non Sparking Combination Wrench
Non Sparking Combination Wrench Продавец: Hebei Sikai Safety Tools Manufacturing Co.,Ltd Non Sparking Combination Wrench Our premium Non-Sparking Combination Wrench, designed for enhanc...
Timing Belt
Timing Belt Продавец: CHIBOSS Drive System (Suzhou) Co., Ltd. Timing Belt Timing Belts – Precision & Reliability from Your Trusted Timing Belt Suppl...
Truck Steering System
Truck Steering System Продавец: Shaanxi Bowen Hongyun Trading Co. Ltd Truck Steering System The plays a critical role in maintaining control, stability, and saf...