Used In Grinding Of Large And Medium-sized Casting Sprue And Riser Pneumatic Grinder
GS250(industrial) Pneumatic grinder(Block)applying: 1、it is used for thining the ingate and the feeder head of the large or medium scale cast. 2、it is used for thining the large wooks dies and jointing gap. 3、it can dopolishing by hop-wheel replacing. 4、it can clear the rust and the old oilpaint layer by steel wirewheel replacing.technical data: Max Grinder Size :150mm Free Speed :5400r/min Rated Speed : 2600r/min Air pressure : 0.5Mpa Air consumption;54L/S Air Hose Size: Φ19mm Net Weight:14kw Dimensions;280×285×235mm
Website:
Другие товары поставщика
|
|
Chisel no1applying:1.The length of moil point for penumatic hammer of G7,Website:. are 250-1500mm2.Pick brazing is a direct contact and work tools,... |
|
|
CZ2 Chipping hammerapplying: 1、Used for grooving before welding and clearing spatter after welding and leveling up burr. technical data:... |
|
|
D9 Sand rammer applying:1、It is working capacity is comparatively large and is used for tamping large and Middle sand mould castings.2、It can also ... |
|
|
G20B Pneumatic hammerapplying: 1、Used for truncating coal bed and breaking soft ore into pieces in mineral industry.2、Used for destroying solid ... |
|
|
C7 Chipping hammerapplying:1、The chipping hammer Used for hacking breaking,Website:, repairing and digging.2、The chipping hammer Used in hatching b... |
Все товары поставщика
Похожие товары