Wrapped Bronze Bushing With Through Holes TSB-092
Wrapped bronze bushing with through holes TSB-092STRUCTURE: Bronze bearings made of CuSn8 with through-holesMICROSECTION: CuSn8 with composition (Sn:8%,Website:, P<0.05%, Cu:Rest)TECHNICAL DATA:Max. Load PStatic120 N/mm2Dynamic40 N/mm2Max. sliding speed V(m/s)2.5 m/sMax. PV factor (N/mm2.m/s)2.8 N/mm2.m/sOperating TemperatureMax. Greased150°C Max. Oil lubricated250°C Coefficient of friction0.06~0.15μSurface roughness (Ra)≤ 0.8 µmSurface hardnessNormal>200 HBFor longer service life>350 HBCHARACTERISTICS:Bearing material CuSn8 made of solid bronze strip with perforation for lubricated applications.Good wear resistance, suitable for rough conditions.Optimum performance under relatively high loads and low speeds.These holes will allow greater capacity to collect lubricant, which build up a lubrication film at the start of movement and reduce the frication.TYPICAL APPLICATIONS: Wrapped bronze bushing with through holes TSB-092 is suitable for high load, lower speed application like construction, transport and agriculture machinery etc.
Другие товары поставщика
|
|
|
Low friction woven fabric oilless bearing TSB-TEXSTRUCTURE: Metal-Polymer Composite Bushing Material COMPOSITION: Steel Back + PTFETECHNICAL DATA:
... |
|
|
|
Gear pump self-lubricating sleeve bearing TSB-1TSTRUCTURE: Metal-Polymer Composite Bushing Material COMPOSITION: Steel Back + Porous Bronze Sinter ... |
|
|
|
Stainless steel oiles sliding bearing TSB-1SSTRUCTURE: Metal-Polymer Composite Bushing Material COMPOSITION: Stainless Steel Back + Porous Bronze S... |
|
|
|
PTFE-based self lubricating composite bearing TSB-10STRUCTURE : Metal-Polymer Composite Bushing Material COMPOSITION: Steel Back + Porous Bronze Si... |
|
|
|
CuPb24Sn4 bimetallic gearbox bushes TSB-720STRUCTURE: Steel Backing and Bronze Alloy Overlay COMPOSITION: Steel + CuPb24Sn4 bronze alloyMICROSECTIO... |
Все товары поставщика
Похожие товары
