.

SS Shell Vent Filters

Stainless Steel Shell Vent Filter Filter heater, respirator heater is designed in accordance with the requirements of GMP, which consists of flexible heating and temperature control box temperature control box composed of two parts. Mainly used for the filter housing to provide heating. Insulation function to prevent the accumulation of condensate and microbial breeding. Widely used in biological products, pharmaceuticals, fermentation and other industries in the water for injection systems, filtration and purification processes and cans and containers of filters and respirators. Technical Parameters Rated voltage: 220V Voltage withstand voltage: 1.5kv Insulation resistance: > 5MΩ Insulation material: (silicone rubber) Ambient temperature: -60 ℃ - +250 ℃ Operating temperature: 0-150 ℃ Display mode: Heating temperature - red LED, Set temperature - green LED Sensor: Type K thermocouple or PT100Main Feature: 1, the special design of the flexible heating jacket can fit the filter shell, easy to install 2, easy to upgrade the existing filter shell, without duplication of investment 3, heating layer and insulation layer of a composite, significant energy saving 4, a separate control box can be positioned according to need, not limited to the installation location of the filter 5, LED digital temperature control system, can set their own temperature, easy to operate 6, multiple security measures to adapt to different environments. 7, the heater surface can be safe to touch.Applications: Pure water tank, injection water tank, ingredients tank and other products of the respirator to prevent heat insulation filter to form condensed water. Freeze-Dryer Gassing Filter - Removal of Condensate after Steam Sterilization Residual or Integrity Tested Moisture Raw materials and finished liquid filter heating insulation filter drying and so on.Tanvi Product Selection Table  (Special requirements can be customized, compatible with Millipore, Pall and other imported filter)Product CodeLengthPowerOperating TemperatureMaterial of Filter HousingTS46HC05TJ5"100W0-150℃Jacket SUS304        Inner tube SUS316L      Stainless steel temperature control boxTS46HC10TJ10"200WTS46HC20TJ20"400W


Отправить запрос, связаться с поставщиком

Кому: Hangzhou Tanvi Filtering Equipment Co.,Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Ethanol Sterile Filtration Trolley System
Tanvi in-line filter housings are designed to meet the requirements of the bioparmaceutical industry.All 316L or 304 stainless steel construction w...
Pleated Stainless Steel wire Mesh Filter Cartridge Tanvi pleated stainless steel wire mesh filter cartridges made entirely of 304 or 316 stainless ...
PE / PA precision filter is designed for liquid that contents much solid and much residue after filtered. Excellent chemical properties Rigid micro...
Tanvi inkjet capsule filters are all-polypropylene filter, the dissolution was minimized. It reduce the impact on the ink composition. There are a ...
Все товары поставщика

Похожие товары

Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer Продавец: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB Продавец: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board Продавец: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...
4 Layer ENIG Impedance Control Half Hole Fr4 PCB
4 Layer ENIG Impedance Control Half Hole Fr4 PCB Продавец: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l...
2 Layer OSP Impedance Control Half Hole PCB
2 Layer OSP Impedance Control Half Hole PCB Продавец: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness:...