5-axis Laser Micromachining System
The ordinary laser micromachiningsystem can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole, which greatly expands the laser drilling applications. With different wavelengths and super fast lasers, the thermal effect of drilling is small and the surface treatment is smooth. Only by making the processing materials unlimited, has been applied to drilling and processing in all walks of life.
Key Features Of 5-axis Laser Micromachining System
In order to ensure accurate synchronization, it is necessary to process the position data of each axis under the same processor and control clock. This design uses high speed digital chip FPGA to achieve
The positioning accuracy of the galvanometer will directly affect the machining accuracy of the equipment, and the factors affecting the positioning accuracy of the galvanometer mainly include the accuracy of the galvanometer feedback system, controller and the accuracy of correction.
The self-developed 24-bit high-precision encoder, combined with the high bandwidth driver based on PID and feedforward controller, improves the control accuracy of the system.
Adopt high-precision CNC machine tool to fix and clamp important structural parts at one time to ensure high-precision installation of galvanometer motion module.
Hansscannerprovides laser galvanometer, galvanometer scanner, laser micromachining pptand etc. If you want to know galvanometer costor more, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Laser Scanning System From Han's Scanner | Han's Scanner focuses on galvo scanning systemsolutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating sc... |
 |
3d Large Field Size Dynamics Focusing System | The 3d dynamic focusing system mainly consists of XY galvo, dynamic focusing module, control card and upper computer software. By changing the posi... |
 |
High Power Galvanometer Welding System | High power galvo laser weldingis independently developed by Hans Scanner. The system after fully validated, with carefully designed double wind coo... |
 |
Digital Galvo Driver | Hansscannerdigital driver board can drive the full range of Han's Scanner photoelectric galvanometer motor and grating galvanometer motor, one driv... |
 |
F-theta Lens | What Is FTheta Lens F-theta Lens Han's Scanner f theta scan lensseries products are the most commonly used parts in the laser field. After our ... |
Похожие товары
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Продавец: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF | Продавец: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
