RJ45 SPD 10/100/1000Mbps network signal surge arrester ethernet surge protection device
Data line protectorseries are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance over voltage.
Features Of ChinaSPDFor Network / Data Line Surge Protector
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
RJ45 connector
Application Of SPD For Network / Data Line Surge ProtectionDevice
CAT6/6e, cat5/5e compatible
10/100/1000Mbps Base-T Ethernet protection
LAN, FDDI,CDDI, ATM
PDH, SDH, SPDH
Industrial control
Loss prevention system device; Security system; Security integration.
IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system
Specification Of SPD For Network / DataSurge Protector100Mbps D05J4 series
Model |
D05J4 |
D05J4-8 |
D05J4-16 |
D05J4-24 |
D05J8H |
||||
Lightning projection zone(LPZ) |
2 |
||||||||
Standards Compliance |
IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002 |
||||||||
According to IEC61643 |
III |
||||||||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||||||||
Max continuous operating voltage Uc |
5V |
||||||||
Nominal discharge current (8/20µs) In |
3KA |
||||||||
Max discharge current Imax (8/21µs) Imax |
5KA |
||||||||
Voltage protection Level @C2(8/20µs) Up |
≤55V |
||||||||
Voltage protection Level @C3(1kV/µs) Up |
≤25V |
||||||||
Rated load current IL |
200mA |
||||||||
Limiting Voltage(10/700µs) |
≤20V |
||||||||
Cut-off Frequency fG |
250MHz |
||||||||
Response time tA (L-N/N-PE) |
1ns |
||||||||
Protection line |
1/2,3/6 |
1/2,3/6,4/5,7/8 |
|||||||
Protection port |
1 |
8 |
16 |
24 |
1 |
||||
Mounting |
Be Installed between protected equipment and signal line |
||||||||
Adapt Transmissionrate |
100Mbps 1000Mbps |
||||||||
Transmissionstandards |
100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6 |
||||||||
Dimension |
85(H)×25(W)×25(L)mm |
190(H)×85(W)×48(L)mm |
482(H)×86(W)×44(L)mm |
83(H)×25(W)×25(L)mm |
|||||
Interface form |
RJ45 |
||||||||
IP code(IEC EN 60529) |
IP20 |
||||||||
Error rate |
≤10-12 |
||||||||
Material/color |
Aluminum/Blue |
||||||||
Insertion loss |
≤.3.0dB |
||||||||
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95% |
Model |
D05J8 |
D05J8-4 |
D05J8-8 |
D05J8-16 |
D05J8-24 |
||
Lightning projection zone(LPZ) |
2 |
||||||
Standards Compliance |
IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002 |
||||||
According to IEC61643 |
III |
||||||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||||||
Max continuous operating voltage Uc |
5V |
||||||
Nominal discharge current (8/20µs) In |
3KA |
||||||
Max discharge current Imax (8/21µs) Imax |
5KA |
||||||
Rated load current IL |
200mA |
||||||
Limiting Voltage(10/700µs) |
≤20V |
||||||
Cut-off Frequency fG |
250MHz |
||||||
Response time tA (L-N/N-PE) |
1ns |
||||||
Protection line |
1/2,3/6,4/5,7/8 |
||||||
Protection port |
1 |
4 |
8 |
16 |
24 |
||
Mounting |
Be Installed between protected equipment and signal line |
||||||
Adapt Transmission rate |
1000Mbps |
||||||
Transmission standards |
10BaseT/ 100BaseT/1000Base TX,CAT5/CAT6 |
||||||
Dimension |
85(L)×25(W)×25(H)mm |
106(L)*75(W)*31(H)mm |
190 (L)×85(W)×48(H)mm |
482 (L)×86(W)×44(H)mm |
|||
Interface form |
RJ45 |
||||||
IP code(IEC EN 60529) |
IP20 |
||||||
Error rate |
≤10-12 |
||||||
Material/color |
Aluminum/Blue |
||||||
Insertion loss |
≤0.5dB |
||||||
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95% |
As a spd supplier, we will do our best to meet all the needs of customers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Compound Antenna Feeder Protector | Designed for antenna coaxial device and receive system not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge. IEE... | |
Smart Groud Resistance Meter | This product is specially designed for online monitoring of the ground network resistance of lightning protection devices. This smart ground earth ... | |
Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector | Quarter wave RF surge protectoris designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, in... | |
SPD for Telecommunication/ Antenna protector | Spd telecomis a kind of antenna lightning protector, which is mainly used for coaxial cable lightning protection for feeder lines. Antenna-feed lig... | |
SPD for Ethernet Power System | The POE Ethernet series lightning protection device is a lightning protection device developed for POE network power supply equipment in accordance... |
Похожие товары
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Продавец: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... | |
Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF | Продавец: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... | |
Heavy Copper PCB Manufacturer | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... | |
8 Layer ENIG Half Hole Custom PCB | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... | |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |