Electrical Tape & Spiral Wrapping Bands
Spiral wrapping band is perfect for organizing and protecting your wiring and cables. electrical wire insulation tapeand spiral wrapping band help eliminate accidents that can be caused by loose cords and provides a neat appearance for any entertainment system or office setting. The spiral wrapping band not only protects cables from abrasion, but allows breakouts of single or multiple cabless for re-routing or replacement. Included with each band is a clipper guide (aka Spiral Wrapping Tool), which allows the cable insulation tapeto be easily pulled through the spiral wrapping band, how to use and install this reusable spiral wrapping band.
Advantages Of Spiral Wrapping Bands
Spiral wrapping bands materials of varying synthetic polymers such as PTFE, polyethylene, and PVC, provide flexibility, performance, and mechanical properties designed to support diverse applications in any environment, including UV protection, flame, and corrosion resistance, and functionality in extreme cold or heat temperatures.
Cable management must also provide a preventive organizational safety measure that protects people on worksites, employees, and visitors alike, from injury or damage from tripping, stumbling or becoming entangled in loose bundles of wires.
How to Use Spiral Wrapping Bands for Cable Management
Prepare Your Cables:
Gather all the cables you want to manage.
Straighten out any tangled cables and align them in the desired order.
Select the Right Size:
Choose a spiral wrapping band that is large enough to accommodate the cable bundle comfortably. The band should be able to wrap around the cables without being too tight.
Start at One End:
Begin at one end of the cable bundle.
If your spiral wrap has a split design, open it up along the slit.
Wrap Around:
Wrap the spiral wrapping band around the cable bundle in a spiral manner.
Ensure that the band is not too tight, allowing flexibility for movement and adjustments.
Continue Wrapping:
Continue wrapping the band along the length of the cable bundle.
If your cables have branches, you can either separate them into smaller bundles or include them in the main bundle, depending on your preference.
Secure the End:
Once you reach the end of the cable bundle, secure the spiral wrap by tucking it into itself or using a cable tie to hold it in place.
Make sure the end is secure to prevent the spiral wrap from unraveling.
Adjust as Needed:
After securing the spiral wrap, adjust the position of the cables within the wrap to ensure a neat and organized appearance.
If necessary, use additional wire insulation tapeto secure specific sections of the bundle.
Cut Excess Material (if applicable):
If your spiral wrap is longer than needed, use scissors or a utility knife to trim off the excess material.
Test Flexibility:
Ensure that the cables can still move and bend as needed without being overly constrained by the spiral wrap.
Using spiral wrapping bands for cable management provides a tidy and organized solution, making it easier to identify and manage cables. Additionally, it helps prevent tangles and protects cables from wear and tear.
For more information about types of electrical tapeand types of insulation tape, please feel free to contact us!
Hont electrical, as an excellent cable tie factory, offers a wide range of metal cable tiesfor you to choose from.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Insulated Terminals Tool | Insulated Terminals tool can use peel off the wire shelve without hurt cord, some insulated crimp tools also have cut for cord wire can adjust co... | |
ONE OF THE MOST UNCONSPICUOUS PARTS IN THE WIRING MANAGEMENT - CABLE TIES | In a complete set of wiring harnesses, there are generally more than a thousand parts, and the cable tie is one of the most inconspicuous parts amo... | |
Insulated Male Disconnects | The optical isolation terminal has the advantages of low signal loss at the control end, high switching frequency, no mechanical contact jitter, no... | |
3 To 1 Heat Shrinkable Tubings | 3 to 1 heat shrinkusing high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic acceler... | |
Cable Tie Gun | Cable tie cutter gun is suitable for fast band wire and cable automatic cut and bind left part. Cable tie siez: witdh 2.5-4.8mm. Aviation cable t... |
Похожие товары
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Продавец: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... | |
Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF | Продавец: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... | |
Heavy Copper PCB Manufacturer | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... | |
8 Layer ENIG Half Hole Custom PCB | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... | |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |