PTFE Molded Tube
PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. It has many excellent features.
PTFE molded partshave corrosive medium fluid piping, insulating sheathing and drive shaft packing. Conveying high temperature corrosive gas, liquid, which is other pipelines can not be replaced. It can be used to connect graphite, ceramic or glass pipes with lower machinery, to be used as feed and discharge pipes for tank cars, storage tanks, containers or reaction kettle, to carry out pipe dislocation connection or to balance pipe displacement and size change caused by climate or other reasons, or to eliminate high-frequency mechanical vibration. In special occasions can also be used as tubular reactor or heat exchanger.
Specification of PTFE Molded Tube
|
Product name |
Speciations(mm) |
Remarks |
||
|
Diameter |
Length |
|||
|
PTFE pipe |
Molded tube |
Outer: 20-600 |
100-250 |
|
|
Hydraulic tube |
Outer: 50-300 |
500-1000 |
Diameter needs machine processing |
|
|
Extruded tube |
Outer: 30-200 |
<2000 |
the length can be customized as customer's requirement |
|
The Technical Indexes of PTFE Molded Tube
|
Properties |
The implementation of standards |
The technical performance index |
Remarks |
||
|
The proportion of |
Tensile strength(Mpa) |
Crack elongation(%) |
|||
|
Molded rods |
ZBG33003 SFB-1 |
≥14 |
≥140 |
QB/T 3626-1999 Light industry standard |
|
|
Molded pipe |
Company standard |
≥15 |
≥150 |
||
|
Hydraulic rod/tube |
Company standard |
≥14 |
≥150 |
||
|
Extrusion rods/tube |
Company standard |
≥15 |
≥150 |
||
Note: If the customer has special requirements for performance indicators, the parties shall decide through negotiation.
Usage of PTFE Molded Tube
Can be processed into a variety of seals, gaskets.
Electrical insulation electrical equipment parts.
Can also make a variety of chemical anti-corrosion, high temperature resistance or anti-stick parts or products.
We can offer sorts of industrial plastic productfor sale, if you have needs to buy polytetrafluoroethylene products, please leave us a message.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Steel Lined with PTFE Products/PTFE Lined Steel Products | Nowadays, steel lined PTFE pipe fittings are one of the most commonly used pipe fittings in the domestic chemical industry. As one of the professio... |
 |
PTFE Machined Parts | PTFE machined partsare custom-made components manufactured from polytetrafluoroethylene material. These parts are created through machining process... |
 |
PTFE Film | Polytetrafluoroethylene filmis made of PTFE resin by molding, sintering, cooling into blank, then by turning, calendering. The ptfe thin filmmad... |
 |
Silicone Rubber Products | Silicone rubber is known for its excellent temperature resistance, with the ability to withstand extreme heat and cold without losing its physical ... |
 |
PP Sheet | Polypropylene plastic sheetsoffer good dimensional stability, low moisture absorption, and are easy to fabricate and weld. They are available in di... |
Похожие товары
 |
Medical Plastic Parts | Продавец: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | Продавец: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | Продавец: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
