Filter and Flow Limiting Apparatus
The family mold is used to produce injection parts for liquid filtration and flow monitoring and control systems.
These accessories are customized made for Rotational Filter and Flow Limiting equipment and devices. There are two parts which are assembled together, one is hat shape, one is small ring shape. When connect the ring part onto the hat shape part, then install to the filtering and flow limiting apparatus.
Basic Information for Filter and Flow Limiting Apparatus
Water Filter MoldSpecification
|
Description |
CLoche-Bague PP parts |
|
Plastic material |
PP or PEHD |
|
Mould dimension(mm) |
685*550*1014 mm |
|
Mould weight (T) |
1350 kgs |
|
Mould cavity & core steel |
NAK80 |
|
Nos of Cavity |
1+1 |
|
Manufacture time (day) |
40 days |
|
Mould life |
≥30,0000 |
|
Molding cycle (S) |
50 S |
|
Cooling line connector type |
quick coupling |
|
Mold Characteristics |
Hydraulic Cylinder to drive the gear and driving wheel for unscrewing mechanism. |
Suggestions of Designing Filter and Flow Limiting Apparatus
The screw thread section must be assembled perfectly.
There should be with draft angle (say 1 degree) for the inner position of the hat shape part.
It is better to design the radius positions without sharp edges.
Precautions for Mould in Water Filterand Flow Limiting for Apparatus
In the design of the injection mold, the family mold is an effective way to increase productivity and save cost.
Family Mold is containing different shaped cavities, in one shot, each cavity produces a different structure component that is assembled into a full set apparatus with same color and texture as much as possible.
Because the structure of each cavity is different, it is imperative to design the mold with balanced processing performance.
The gating system of multi cavity family mold has two ways: natural balance and unnatural balance. Natural balance system is of exactly same cooling conditions and runner, gate, cavity at the same dimension. In the non-natural equilibrium gating system, because the length of the runner to each cavity is different, it is necessary to adjust the size of the runner so that the plastic melt can feed each cavity at the same time with the suitable forming pressure and temperature.
As a reliable plastic injection factory, we can provide kinds of injection molded partsfor sale, if you are interested, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Plastic Gear Mold | Injection molded plastic gearsis one of the most widely used transmission mechanisms in the field of instruments & meters, timers, reducers, ca... |
 |
Fan Mold | If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rot... |
 |
Fan Mold | If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rot... |
 |
Game Controller Mold | Game Controller Molds To increase the production efficiency, we need optimize the mold cooling system to shorten the cycle time. As a result, mach... |
 |
Medical Plastic Injection Mold | Provide complete solutions from product design/mold manufacturing/injection mass production. Provide professional medical consumables and medical ... |
Похожие товары
 |
Medical Plastic Parts | Продавец: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | Продавец: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | Продавец: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
