Ferrite/Ceramic Magnets
Category: hard ferrite magnets/ china ceramic magnets
Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed
Disadvantages: low magnetic energy; not resistant to low temperature
china ferrite magnetsbelong to sintered permanent magnetic material, which made from oxide iron, barium, and strontium carbonate by ceramic processing technology, just because of the processing method, it also named as ceramic magnets in America.This magnetic material has strong ability to resist demagnetization and the advantage of low cost.
Ferrite permanent magnets classified as isotropic and anisotropic. Isotropic ferrite magnets have weak magnetic strength, but it can be magnetized through different directions. Anisotropic ferrite magnets have stronger magnetic strength than isotropic, but it can be only magnetized through certain direction.
By magnetic strength, ferrite magnets or ceramic magnets are much weaker than neodymium permanent magnets and SmCo magnets, but stronger than AlNiCo magnets. But its advantages of low cost, excellent corrosion and demagnetization resistance, which makes it widely used in the area of magnetic separator, speaker magnets, magnetic toys, office magnets, car magnets. From the aspect of shape, hard ferrite magnets are usually available as ceramic block magnets, ferrite ring magnets, ferrite disc magnets and ceramic block magnets. Ferrite disc magnets often used on office magnets, ferrite ring magnets often used to make loudspeaker, ferrite block magnetscan be used to make separate magnets.
Ferrite magnets (ceramic magnets ) was developed in the year of 1960, and it is lower in power (B, Br, BHmax) compared to other formulations, and are very brittle. However, they have very high Hcj and good Tc, and are quite corrosion-resistant. So ceramic magnets are a cost-effective choice.
ferrite block magnetproduced by powder metallurgy ways, the remanence is low, The coercive force is high, especially suit for magnetic structure used in the condition of dynamic operation. The material is hard and crisp, silicon carbide tools are used for cutting machine. The main material for ferrite magnets is oxide, not easy to be rust. Permanent ferrite is corrosion resistant magnets or corrosion proof magnets material.
|
Grade |
Br |
HcB |
HcJ |
(BH)max |
Work Temp |
|
|
China Standard |
IEC standard |
mT |
kA/m(min.) |
kA/m(min.) |
kJ/m(min.) |
℃(max.) |
|
Y10T |
HF 8/22 |
200-235 |
125-160 |
210-280 |
6,5-9,5 |
250 |
|
Y20 |
HF 20/19 |
320-380 |
135-190 |
140-195 |
18,0-22,0 |
250 |
|
Y22H |
HF 20/28 |
310-360 |
220-250 |
280-320 |
20,0-24,0 |
250 |
|
Y23 |
HF 22/30 |
320-370 |
170-190 |
190-230 |
20,0-25,0 |
250 |
|
Y25 |
HF 24/16 |
360-400 |
135-170 |
140-200 |
22,5-28,0 |
250 |
|
Y26H |
HF 24/23 |
360-390 |
220-250 |
225-255 |
23,0-28,0 |
250 |
|
Y26H-2 |
HF 24/35 |
360-380 |
263-288 |
318-350 |
24,0-28,0 |
250 |
|
Y28 |
HF 26/16 |
370-400 |
175-210 |
180-220 |
26,0-30,0 |
250 |
|
Y25H |
HF 26/18 |
360-390 |
175-215 |
215-230 |
24,0-27,0 |
250 |
|
Y28H |
HF 26/24 |
380-400 |
240-260 |
250-280 |
27,0-30,0 |
250 |
|
Y28H-2 |
HF 26/26 |
360-380 |
270-295 |
380-405 |
26,0-30,0 |
250 |
|
Y30 |
HF 28/16 |
380-385 |
190-210 |
200-220 |
26,0-28,0 |
250 |
|
Y30BH |
HF 28/28 |
380-400 |
230-275 |
235-290 |
27,0-32,0 |
250 |
|
Y30H-2 |
HF 30/26 |
395-415 |
275-300 |
310-335 |
28,5-32,5 |
250 |
|
Y32 |
HF 32/17 |
400-420 |
160-190 |
165-195 |
30,0-33,5 |
250 |
|
Y33 |
HF 32/22 |
410-430 |
220-250 |
225-255 |
31,5-35,0 |
250 |
|
Y33H |
HF 32/25 |
410-430 |
240-270 |
250-275 |
31,5-35,0 |
250 |
|
Y35 |
- |
410-430 |
175-195 |
180-200 |
30,0-32,0 |
250 |
Property/Performance Parameter of Ceramic Magnets(America Standard)
|
Material |
Br |
HcB |
HcJ |
(BH) Max |
||||
|
mT |
KG |
KA/m |
KOe |
KA/m |
KOe |
Kj/m3 |
MGOe |
|
|
C1 |
230 |
148 |
258 |
|||||
|
C5 |
380 |
191 |
199 |
|||||
|
C7 |
340 |
258 |
318 |
|||||
|
C8 |
385 |
235 |
242 |
|||||
|
C8B |
420 |
232 |
236 |
|||||
|
C9 |
380 |
280 |
320 |
|||||
|
C10 |
400 |
288 |
280 |
|||||
|
C11 |
430 |
200 |
204 |
|||||
Meank, as an excellent holding magnets manufacturer, offers a wide range of strong magnets for magnet fishingfor you to choose from.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Neodymium/NdFeB Magnets | Neodymium-iron-boron magnets short asNdFeB magnets,NIB magnets,neo magnetsor neodymium magnets. Following called as NdFeB magnets or neodymium ma... |
 |
Magnetic Stick Toys | Magnetic Stick Toy Magnetic sticks are the same as magnetic panels, they are also construction intelligence toys that rely on the magnetic force. ... |
 |
Neodymium Pot Magnets | Steel housed magnets are called neodymium pot magnet or neodymium cup magnets. Besides of protecting the inner magnets, the steel cups can transfer... |
 |
Magnetic Neocube | Background of Neocube Magnet for Sale At the beginning, magnetic neocube are interesting neodymium magnets toy developed for adults, the magnetic ... |
 |
Adhesive Magnets | Adhesive magnets(adheisve backed magnets) are used more and more in industry. Someone asks what is an adhesive magnet? The adhesive has not magneti... |
Похожие товары
 |
ABS Edge Banding Customizable | Продавец: Shijiazhuang Qimeida Rubber Material Products Co., Ltd | ABS Edge Banding Customizable ABS edge bandingdoes not add any fillers (such as calcium carbonat... |
 |
BOBCAT T190 BELT 6736775 | Продавец: Colorful tower machinery co ,. ltd | BOBCAT T190 BELT 6736775 Application:BOBCAT Fitting Machine:Excavator Brand:aftermarket Mater... |
 |
Thermoset Molding | Продавец: WIT MOLD LIMITED | Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc... |
 |
UNSCREWING MOLDS | Продавец: WIT MOLD LIMITED | UNSCREWING MOLDS Unscrewing moldis a type of mold used in injection molding, primarily for produ... |
 |
dsa anode | Продавец: Baoji Giant Technology Materials Co., Ltd | dsa anode DSA Anode , also known as dimensionally stable anodes, are titanium or niobium su... |
