.

JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts

JMZ-1-3.0A Rubber & Metal Anti Vibration Rubber Isolator Mounts

JMZ-1-3.0A rubber isolation mounting feetbelongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good impact resistance and a 3 kg maximum rated load. It can vibrate isolation in any direction. This type of rubber isolation mounting feet has a wide operating frequency range and can be used in harsh environments such as high and low temperature and chemical pollution. It has good performances such as anti-humidity, anti-salt fog, high and low-temperature resistance, mold resistance and long service life.

Rubber Mounting FeetRubber Isolation Mounting FeetProduced by Anti Vibration Mounts Factory

Model Number Code Ordering of JMZ-1-3.0B:

Structural Diagram of JMZ-1-3.0B:

Dimension of JMZ-1-3.0B rubber isolation mounting feet:

Technical Parameter of JMZ-1-3.0B Rubber Isolation Mounting Feet:

Vibration Curve of JMZ-1-3.0B Rubber Isolation Mounting Feet:

Impact Curve of JMZ-1-3.0B Rubber Isolation Mounting Feet:

With the rapid development of modern industrial engineering, the various manufacturing machine, transportation machine are all developing to high speed, high efficiency, high precision, and automation. However, with the increase of equipment's power and speed, the intensity of the vibration source in engineering practice is increasing constantly, the harm is also obvious because of vibration and noise. Vibration does the great harm to operators, precision instruments, machinery equipment and architectural structure, at the same time, vibration and the noise is also bad for people's living condition and physical and mental health. Therefore, harm from vibration and noise is drawing more and more attention from researchers from various countries.

Vibration and noise are harmful in most cases, vibration hazards are regarded as one of the seven environmental hazards. The hazards of vibration and noise can be divided into the following aspects:

When vibration is over certain strength, it will do harm to human bodies. People will have insomnia, lumbago, backache, fatigue, impotence, headache, dizzy, drowsy, gastro-intestinal, low appetite and weak attention id they are under the environment of large vibration and noise for a long time, it is also easy to make mistakes and technical error, what's worse, it will make people's senses blunt and cause physical illness.

Vibration brings unsafe factors to buildings when vibration is acting on buildings, that is to say, mechanical energy is acting on buildings, it will create deformation. Vibration makes bigger deformation and setting of the ground. When vibration frequency and building structure frequency is the same or similar, the harm will be more serious, it even makes buildings fall down. Vibration will cause uneven sedimentation and damage plant and equipment if the basic geological condition of equipment is bad.

At present, machinery equipment and power is larger and larger and its variety is more and more diversified, after the vibration from machinery equipment is transferred to basics, floors, walls and other structure, vibration will transfer to other room by elastic waves and create vibration between neighboring air, so the vibration of objects will be spread to everywhere in the form of sound wave, that is what we called noise. Ferroconcrete and metal are the good material for isolating air noise, but it makes no differences for solid state noise, sometimes a pump can break the peace of the whole building.

Vibration breaks the accuracy, reliability and sensitivity. If the instruments and apparatus are near the strong vibration source, vibration will have the different influence on them. Influence on the normal operation of instruments and influence on the accuracy of the scale of apparatus reduces the precision of measurement, what's worse, it will make instruments out of order, especially for electric instruments.

Therefore, how to decrease the harm of vibration and noise efficiently is a very important issue for the industrial development all over the world, vibration control is the most direct way to decrease the harm of vibration and noise in engineering practice, so the research of vibration control is necessary for controlling vibration and noise.

If you are looking for reliable rubber metal isolatorssuppliers, contact HOAN now!

Xi'an Hoan Microwave Co. Ltd., headquartered in China, Xi'an city, was founded in 2005, is a premier supplier of Industry Energy Absorption and Vibration Isolation Products.We provide wire rope shock absorber, wire rope vibration isolators, equipment isolation mounts, rubber vibration isolator mounts, wire rope isolatorand etc. Want to know more? Contact us now.



Отправить запрос, связаться с поставщиком

Кому: Xi\'an Hoan Microwave Co., ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts
JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts JMZ-1-3.0A Rubber & Metal Anti Vibration Rubber Isolator Mounts JMZ-1-3.0A rubber isolation mounting feetbelongs to the JMZ-1 series. It adopts...
JMZ-T Rubber Vibration Damping Sandwich Mounts
JMZ-T Rubber Vibration Damping Sandwich Mounts The JMZ-T seriesvibration damping sandwich mountsis the new designed model, which is designed especially for the military use. Comparing with the w...
Multi-Application Wire Rope Vibration Isolator
Multi-Application Wire Rope Vibration Isolator Hoan multi-application wire rope vibration isolator is used widely in the field of RC car, camera drone, UAV camera, video, military vehicles, high...
JMZ-1-1.5B Rubber & Metal Anti Vibration Mount
JMZ-1-1.5B Rubber & Metal Anti Vibration Mount Advantages of base isolation technology 1. The base isolation can effectively reduce the seismic responseof the structure. The traditional goal of...
GRY-10A Stainless Steel Camera Vibration Isolator for UAV/Camera/Gimbal Shock Absorption
GRY-10A Stainless Steel Camera Vibration Isolator for UAV/Camera/Gimbal Shock Absorption The GRY-10A marine shipbuilding vibration mount is made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. The max static lo...
Все товары поставщика

Похожие товары

Spindle Test Arbor
Spindle Test Arbor Продавец: Shandong Jinjie Machinery Co.,Ltd Used for detecting the concentricity of the spindle. Wooden box packing, store vertically to p...
Shrink Fit ER Collet
Shrink Fit ER Collet Продавец: Shandong Jinjie Machinery Co.,Ltd Shrink fit collets adapter is used for collet chuck, driven tool holders, and direct clamping in ...
STANDARD SHRINK FIT CHUCK 4.5°
STANDARD SHRINK FIT CHUCK 4.5° Продавец: Shandong Jinjie Machinery Co.,Ltd WHAT ARE BENEFITS OF USING SHRINK FIT CHUCK 4.5°? The use of a Shrink Fit Chuck4.5° offe...
SLIM SHRINK FIT CHUCK, 3°
SLIM SHRINK FIT CHUCK, 3° Продавец: Shandong Jinjie Machinery Co.,Ltd WHAT ARE BENEFITS OF USING SHRINK CHUCK, 3°? Using a Shrink Chuck, 3° offers several ben...
Autonomous cleaning machine   VIGGO SC50
Autonomous cleaning machine VIGGO SC50 Продавец: Beijing Idriverplus Technology Co.,Ltd SC50 automatic cleaning robot – your ultimate solution for hassle-free cleaning. With its a...