JMZ-T Rubber Vibration Damping Sandwich Mounts

• 

The JMZ-T series rubber sandwich mountsis the new designed model, which is designed especially for the military use. Comparing with the wire rope isolators, this model is small and tinny, which has no worrying about the space limits.

The max static load of the JMZ-T Series anti vibration rubber sandwich mounts is from 1.4 kg to 2.8 kg, which can be specially used in a good deal of precision equipment and system in helicopter, motor, embedded electronics, etc.

The JMZ-T Series vibration damping sandwich mountscan also be used in the very narrow spaces to meet the mountable environmental requirements. This new type friction damper is the very selection for the limits of the space under some special situations.

Vibration Sandwich MountsVibration Sandwich MountsRubber Vibration Dampening Mounts

Model Number Code Ordering of JMZ-T Series sandwich mounts:

Structural Diagram of JMZ-T Series rubber sandwichmounts:

Vibration Curve of JMZ-T Series vibration sandwich mounts:

Impact Curve of JMZ-T Series vibration damping sandwich mounts:

An earthquake is caused by the motion of the ground which causes the forced vibration of a building that is still at rest on the ground, resulting in internal forces, deformation and displacement in the structure. Vibrational isolation is an isolated earthquake, To isolate or dissipate vibration energy by setting a control mechanism at the base or at a certain location of buildings and structures to avoid or reduce the transmission of vibration energy to the upper structure, reduced the vibration response of the structure, so that only minor motion and deformation of the building can be realized during the earthquake to ensure the safety of buildings. In isolation technology, foundation isolation technology is a hot new technology in the world. The base isolation technology is widely used, it is especially suitable for medium-and low-rise brick-concrete buildings and reinforced concrete buildings.

What is the basic vibration isolation technology

Traditional vibration isolation structure mainly utilizes plastic deformation and energy dissipation of the main structure to dissipate vibration energy after yielding，therefore, the performance requirements of these regions are particularly important. Once these areas have problems due to certain factors, it will affect the vibration resistance of the structure seriously, even produce serious damage. And the foundation isolation is to set a layer of isolation with sufficient reliability between the superstructure of the building and the top of the foundation to separate the superstructure from the foundation, and blocks the propagation of vibration waves to the superstructure, so that the vibration energy of the input structure is absorbed by the energy dissipation elements of the isolation layer, therefore, it will reduce the vibration response of the superstructure greatly, so that ensure the safety of the building.

The basic principle of base isolation technology

According to the experiment, if the period of the structure is prolonged and a large damping is given, it will greatly reduce the acceleration response on the structure. At the same time, large displacements to the structure can be provided by an isolation layer between the bottom of the upper structure and the top of the foundation. In this way, the superstructure will move close to translation during the earthquake, so the safety degree of the superstructure is greatly improved, which is the principle of base isolation. If a damping device is introduced into the structure, the displacement response of the structure can be reduced, and the corresponding acceleration response can also be reduced.

Xi'an Hoan Microwave Co. Ltd., headquartered in China, Xi'an city, was founded in 2005, is a premier supplier of Industry Energy Absorption and Vibration Isolation Products.We provide wire rope vibration isolator, equipment isolation mounts, rubber vibration isolator mounts, sandwich rubber, vibration isolatorand etc. Want to know more? Contact us now.

Другие товары поставщика

	Multi-Application Wire Rope Isolator	Hoan multi-application is used widely in the field of RC car, camera drone, UAV camera, video, military vehicles, highway transportation, marine, s...
	Military Wire Rope Vibration Isolator	This defense vibration isolators / wire isolator are now widely used in the field of military vehicles, armored cars, missile, launcher, highway tr...
	GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone	The GRY-5A marine shipbuilding camera vibration isolation mountis made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. Th...
	Military Wire Rope Vibration Isolator	This defense vibration isolators/wire isolator are now widely used in the field of military vehicles, armored cars, missile, launcher, highway tran...
	JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts	With the rapid development of modern industrial engineering, the various manufacturing machine, transportation machine are all developing to high s...

Похожие товары

	Spindle Test Arbor	Продавец: Shandong Jinjie Machinery Co.,Ltd	Used for detecting the concentricity of the spindle. Wooden box packing, store vertically to p...
	Shrink Fit ER Collet	Продавец: Shandong Jinjie Machinery Co.,Ltd	Shrink fit collets adapter is used for collet chuck, driven tool holders, and direct clamping in ...
	STANDARD SHRINK FIT CHUCK 4.5°	Продавец: Shandong Jinjie Machinery Co.,Ltd	WHAT ARE BENEFITS OF USING SHRINK FIT CHUCK 4.5°? The use of a Shrink Fit Chuck4.5° offe...
	SLIM SHRINK FIT CHUCK, 3°	Продавец: Shandong Jinjie Machinery Co.,Ltd	WHAT ARE BENEFITS OF USING SHRINK CHUCK, 3°? Using a Shrink Chuck, 3° offers several ben...
	Autonomous cleaning machine VIGGO SC50	Продавец: Beijing Idriverplus Technology Co.,Ltd	SC50 automatic cleaning robot – your ultimate solution for hassle-free cleaning. With its a...