.

Automatic Forklift SFL-CDD14

SRC-powered Laser SLAM Small Stacker Automatic ForkliftSFL-CDD14, is equipped with a built-in SRC Series Controller developed by SEER. It can deploy easily without reflectors by adopting Laser SLAM navigation and slam simultaneous localization and mapping, pick up accurately by pallet identification sensor, work through narrow aisle with slim body and small gyration radius and ensure 3D safety protection by various sensors such as 3D obstacle avoidance laser and safety bumper. This self driving forkliftis the preferred transfer robotic for goods moving, stacking and palletizing in the factory.

Descriptions of Automatic Forklift SFL-CDD14

Universal for narrow aisle

Slim and small gyration radius, suitable for narrow aisle applications

Real Laser SLAM

No reflector, easy to deploy with laser SLAM navigation

Comprehensive protection

Obstacle avoidance laser+Bumper+Distance sensor+3D Camera - 360° protection

High precision

Pallet recognition+Accurate handling

Good applicability

Ramp, gap, elevator, transfer, stacker

Flexible dispatching

Seamless access to dispatching system

Specifications of Automatic Forklift SFL-CDD14

Products Comparison

SRC-powered Laser SLAM Small Stacker Automatic Forklift SFL-CDD14

Add products

Technical parameters

Product model

SFL-CDD14

Product name

Laser SLAM small stacker automatic forklift

Dynamic form

Electric

Driving mode

Automatic navigation, handheld driving

Navigation type

Laser SLAM

Tray type

3-stringer pallet

Rated load capacity

1400kg

Load centre distance

600mm

Wheelbase

877mm

Dead weight (with battery)

680kg

Navigation position accuracy [1]

±10mm

Navigation angle accuracy [1]

±0.5°

Fork in-position accuracy [1]

±10mm

Standard lifting height

1600/3000mm

Gantry height

2130mm

Fork surface ground clearance (at the lowest position)

85±5mm

Navigation laser scanning height

2025mm

Vehicle size: length * width * height

1640*990*2043mm

Fork size: length * width * height

1150*180*55mm

Fork outer width

570/680mm

Right-angle stacking channel width, pallet 1000×1200 (1200 placed across forks)

1888mm

Right-angle stacking channel width, pallet 800×1200 (1200 placed along the fork)

1880mm

Map area (Single)

≤ 400000m²

Minimum turning radius

1182mm

Performance parameters

Driving speed: full load/no load

Lifting speed: full load/no load

115/170mm/s

Descent speed: full load/no load

160/125mm/s

Gantry movement speed: full load/no load

/

Passability (slope/step/gap)[2]

< 5%/20mm/30mm

Drive motor power (S2, 60 min)

Lifting motor power (S3, 15%)

3kW

Steering motor power (S2, 10 min)

Service braking mode

Electromagnetic brake

Drive control mode

Servo control

Wheel parameters

Tyre type: drive wheel/support wheel

Polyurethane/Polyurethane

Tire size: driving wheel

230x75mm

Tire size: bearing wheel

80x54mm

Tire size: Balance wheel

115x55mm

Wheel number: driving wheel (×= driving wheel)/ bearing wheel

1X-2/4

Wheel base: bearing side

538mm

Wheel base: driving side

380mm

Battery parameters

Battery specifications

24/180 (Lithium Iron Phosphate)V/Ah

Battery weight

58kg

Comprehensive battery life

10h

Charging time (10%-80%)

2h

Charging method

Manual/Automatic

Battery cycle number

>2000

Certifications

ISO 3691-4

×

EMC/ESD

RoHS

REACH

Function configurations

Wi-Fi roaming function

3D obstacle avoidance [3]

Remote emergency stop [4]

Pallet recognition[3]

Cage stack [3]

High shelf pallet recognition[3]

Pallet damage detection [3]

Pallet stacking and unstacking [5]

The HMI screen

Fork tooth distance sensor

Cargo weight detection

Safety configurations

E-stop button

Sound and light indicator

Braking distance: 1m/s / 1.5m/s

≤30cm / ≤50cm

Vehicle hardware fault detection

360° laser protection

Bumper strip

High safety protection of fork teeth

Others

Network

4G / 5G / Wi-Fi 802.11 a/b/g/n/ac

Ground flatness

±5mm/m²

Scenario requirements

Only suitable for indoor, light intensity ≤40 klx (IEC 61496-3), ground without water and oil and other scenes

Ambient temperature and humidity range

TEMP: 0-50℃ / RH: 10-90%, no compression, no condensation

IP rating

IP20

Noise near driver's ear according to EN12053

≤70dB(A)

The standard

×

There is no

optional

  1. 30%), the robot can navigate from a fixed direction to the target site with the desired repeatability.When the robot runs along the virtual path, it will try to fit the path, but repeatability is not guaranteed.In other words, the robot can guarantee the accuracy of arrival, but not the accuracy of navigation path fitting.Fork positioning accuracy refers to the error range of a forklift truck when it is rising or descending to a specified height.
  2. Slope 5% = arctan(0.05) ≈ 2.8°.The robot cannot stop or turn at the ramp, step or gap, and can only pass quickly perpendicular to the ramp, step or gap.

Seers groupis a professional autonomous mobile robots manufacturers, we provide agv reach truck, amr forkliftand etc. Want to know more? Contact us.



Отправить запрос, связаться с поставщиком

Кому: Shanghai Seer Intelligent Technology Corporation
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

SLAM AGV SFL-CDD20
SLAM AGV SFL-CDD20 SLAM AGVSFL-CDD20 is equipped with a built-in SRC Series Controller developed by SEER. It can pick up accurately by pallet identification sensor, d...
Automated Mobile Jacking Transfer Robots SJV-SW500
Automated Mobile Jacking Transfer Robots SJV-SW500 Laser Slam Omni-directional Latent Automated Mobile Robots SJV-SW500, equipped with SRC series core controller, has an ultra-low chassis, so that i...
Robot Forklift SFL-L14
Robot Forklift SFL-L14 SRC-powered Laser SLAM Stacker Robot ForkliftSFL-L14 can deploy easily without reflectors by adopting Laser SLAM navigation, pick up accurately by ...
Warehouse AMR SRC Controller 2000-I(S)
Warehouse AMR SRC Controller 2000-I(S) Warehouse AMR SRC Controller 2000-I(S), a universal controller designed for mobile robots (AGV, AMR, etc.) in industrial fields, provides some majo...
SFL-CDD14
SFL-CDD14 SFL-CDD14 ● Standard ○ Optional - None Product model SFL-CDD14 ...
Все товары поставщика

Похожие товары

ALP_606
ALP_606 Продавец: Leetop Technology (Shenzhen) Co., Ltd. Leetop_ALP_606 is an embedded artificial intelligencecomputer based on NVIDIA Orin NX core board,...
OUTDOOR OLT
OUTDOOR OLT Продавец: Shenzhen C-Data Technology Co., Ltd. Deploying outdoor cabinet OLTdownward, closer to users 8 PON PORTS GPON OLT FD1608Y 2*10G SFP+...
Optical Transport Networking
Optical Transport Networking Продавец: Shenzhen C-Data Technology Co., Ltd. C-Data Optical Transmission Network (OTN products) products are designed to build professional ne...
Hybrid Fiber-Coaxial
Hybrid Fiber-Coaxial Продавец: Shenzhen C-Data Technology Co., Ltd. C-Data Hybrid Fibre Coaxial HFCproducts provide high-quality image, digital or signal transmissio...
ONU
ONU Продавец: Shenzhen C-Data Technology Co., Ltd. C-Data XPON ONU Enjoy the Rapid Internet Large Bandwidth | High Reliability | Easy Management...