Amphoteric Flocculants

• 

SINOFLOC amphoteric flocculants are partially hydrolyzed polyacrylamide with high molecular weight. This amphoteric polyacrylamide is easily to remove both the positive and negative charged contents particles in a suspension solution.

Amphoteric Polyacrylamide (PAM) Specifications

Amphoteric polyacrylamidealso called zwitterionic polyacrylamide or dipolar ionic polyacrylamide. The molecular chain of the amphoteric flocculant has two or more functional groups, of which have at least one anionic charge and one cationic charge. Unlike other mono-ionic polyacrylamides that only form either a cationic or anionic charges, the amphoteric polyacrylamide simultaneously have both ionic states.

Zwitterionic polyacrylamideis copolymerized by acrylic cationic monomer and acrylamide monomer. The anionic charge forms after the hydratization of the acrylamide monomer, and the cationic charge forms from the acrylic monomer. Thus, the amphoteric polyacrylamide has both positive and negative charges on its molecular chain.

Main applications of Amphoteric Flocculants

SINOFLOC amphoteric flocculants could be used for municipal wastewater treatment and industrial wastewater treatment. Our products have both anionic and cationic charges on the same macromolecule and could be used to remove both positively and negatively charged contaminant in suspensions.

Amphoteric polyacrylamide has been widely used for industrial water treatment, oil refinery plants and mining etc. Amphoteric polyacrylamide has a better performance and efficiency than the mono-ionic polyacrylamide, especially when the water condition is complicated, or the water condition is keep changing, because its ability to decrease the surface tension of the water is way better. And the performance is stable when the water condition changes.

In some special cases, it usually needs to use anionic flocculants and the cationic flocculants synchronously to reach a better effect of the clarification, however, these added anionic flocculants and the cationic flocculants could react with each other and form precipitation and then lead a poor flocculate result. The amphoteric flocculants could easily avoid the problem due to its zwitterionic nature. It could create both charges without casing precipitation. And it’s even easier to operate during the treatment, time saving and labor saving.

As the municipal waste water also has more and more complicated composition, the sludge dewatering requires a higher performance agent. At this circumstance, the simply cationic flocculants is not suitable any more, instead many tests and feedbacks show the amphoteric agent works very well.

The newly developed application is for the oilfield, facts prove that amphoteric polyacrylamide could be used for profile control, water plugging, friction reduction and also the treatment for the fluid.

Packaging - Storage

In 25 kg Kraft bags or PE valve bags or 750 kg big bags. The product should be kept dry place and the storage temperature is 0oC to 35oC, away from direct sunlight and moisture.

Products Feeding

The solutions of SINOFLOCamphoteric polymermust be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC amphoteric polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on amphoteric flocculants, please consult with SINOFLOC team.

SINOFLOC has become a leading manufacturer and supplier of water-soluble polymers in China. We offer flocculant polyacrylamide pam, pam flocculant, pam polymer, anionic polymer, etc. Contact us to know more.

Другие товары поставщика

	Drilling Fluid Additives - Drilling Mud Viscosifier	Drilling Fluid Additives - Drilling Mud Viscosifier In the drilling operation, the anionic high polymer is often used as drilling fluid additive...
	Friction Reducer	SINOFLOC is offering a broad range of leading-class to our customers from fresh water to heavy brines. Our product range includes anionic polyacryl...
	Nonionic Flocculants for Industrial Wastewater Treatment	SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polyacrylamide polymers, in dry powder character. Our products have ...
	Nonionic Flocculants for Industrial Wastewater Treatment	SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polymers, in dry powder character. Our products have been specially ...
	Enhanced Oil Recovery (EOR)	SINOFLOC manufactures a complete range of anionic polyacrylamide for . Our chemicals for Polymer Flooding, long chain polyacrylamide molecules mixe...

Похожие товары

	High Concentration Plastic Color Masterbatch Factory Direct Supply	Продавец: 861445	We are a professional color masterbatch manufacturer with years of R&D experience in plastic ...
	Acid Ink Blue G Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ...
	Acid Black ATT Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o...
	Acid Black 10B Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri...
	Sulphur Dyes	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ...