MBTS (DM) CAS 120-78-5
120-78-5 –Names and Identifiers
| Name | Accelerator (DM) |
| Synonyms | DM MBTS acceltm Accel TM AcceleratorDM Acelerator DM benzothiazolyl AcceleratorMBTS accelerator(dm) Accelerator (DM) Accelerator MBTS Benzothiazyldisuflide Rubber Accelerator DM benzothiazoledisulfide Rubber Accelerator MBTS Benzothiazole disulfide 2-benzothiazyldisulfide Dibenzothiazole Disulfide 2,2′-dithiobis-benzothiazol Benzothiazol-2-yl disulfide 2,2′-Dithiobis(Benzothiazole) 2,2′-Dibenzothiazoledisulfide 2,2-D ibenzothiazole Disulfide 2,2′-Dibenzothiazole disulfide Benzothiazole, 2,2′-dithiobis- 2-mercaptobenzothiazyldisulfide 1,3-benzothiazole 1,1-disulfide 2-mercaptobenzothiazoledisulfide 2-Mercaptobenzothiazyl disulfide 2,2′-bis(benzothiazolyl)disulfide 2-Mercaptobenzothiazole disulfide 2,2′-disulfanediylbis(1,3-benzothiazole) Rubber Pharmaceutical intermediate Refined(DM) 2-(1,3-Benzothiazol-2-yldisulfanyl)-1,3-benzothiazole |
| CAS | 120-78-5 |
| EINECS | 204-424-9 |
| InChI | InChI=1/C14H8N2S4/c/h1-8H |
120-78-5 –Physico-chemical Properties
| Molecular Formula | C14H8N2S4 |
| Molar Mass | 332.49 |
| Density | 1.467g/cm3 |
| Melting Point | 177-180℃ |
| Boling Point | 358.898°C at 760 mmHg |
| Flash Point | 170.855°C |
| Water Solubility | <0.01 g/100 mL at 21℃ |
| Vapor Presure | 0mmHg at 25°C |
| Appearance | Crystallization |
| Storage Condition | 2-8℃ |
| Sensitive | Easily absorbing moisture |
| Refractive Index | 1.752 |
| MDL | MFCD00022874 |
| Physical and Chemical Properties | Density 1.5 melting point 177-180°C flash point 271°C water-soluble <0.01g/100 mL at 21°C |
| Use | It is used as a universal accelerator for natural rubber, synthetic rubber and reclaimed rubber. It is mainly used in the manufacture of tires, inner tube, adhesive tape, rubber shoes and general industrial products. High purity DM (pharmaceutical grade) is an important pharmaceutical intermediate for the manufacture of cephalosporins. |
120-78-5 –Risk and Safety
| Hazard Symbols | Xi – Irritant N – Dangerous for the environment |
| Risk Codes | R31 – Contact with acids liberates toxic gas R43 – May cause sensitization by skin contact R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S36/37 – Wear suitable protective clothing and gloves. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 3077 |
120-78-5 –Upstream Downstream Industry
| Raw Materials | Aniline Sodium hypochlorite 2-Mercaptobenzothiazole Carbon disulfide Toluene Sulfur(α) Sulfuric acid Chlorine Sodium hydroxide Sodium nitrite Ammonia |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Single/two-component epoxy adhesive | Epoxy adhesive is a structural adhesive with high bonding strength. Suitable for bonding various substrates, especially with high bonding strength ... |
 |
PTFE powder coating | Product introduction Polytetrafluoroethylene (PTFE), commonly known as “the king of plastics”, is a polymer compound formed by the pol... |
 |
UV Light Curing Adhesive | Introduction UV curable adhesive is a structural bonding adhesive that solidifies by irradiating UV light. The characteristic of UV curable adhes... |
 |
MDF Powder Coating | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are harmful to the environment -Energy saving,low cu... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
