HS OT 20 CAS 9035-99-8
9035-99-8 –Names and Identifiers
| Name | Insoluble sulfur |
| Synonyms | Insoluble sulfur insoluble sulfur Polymeric sulfur Sulfur, homopolymer TIANFU-CHEM -Insoluble sulfur RubbervulcanizationagentIS(OT) Polymeric Sulfur(Rubber Vulcanization Agent) |
| CAS | 9035-99-8 |
| EINECS | 618-540-6 |
| InChI | InChI=1/H2S/h1H2/q+2 |
9035-99-8 –Physico-chemical Properties
| Molecular Formula | S |
| Molar Mass | 32.065 |
| Use | Mainly as an Advanced Accelerator and vulcanizing agent in the rubber industry are widely used in the production and manufacture of tires and other rubber composite products, such as tire carcass compound, buffer compound, white sidewall compound and tire, rubber, such as rubber tube, adhesive tape and the skeleton material in the adhesive. It can also be used in rubber products such as cables, rubber rollers, oil seals, rubber shoes, etc., and also used in light-colored rubber products with large sulfur consumption. Due to the insoluble sulfur can make the meridian, steel wire and rubber paste more firmly, effectively prevent the rubber spray Frost, improve the heat resistance and wear resistance of the tire. Therefore, insoluble sulfur is an essential raw material in tire production. |
9035-99-8 –Risk and Safety
| UN IDs | 1350 |
| Hazard Class | 4.1 |
| Packing Group | III |
9035-99-8 –Reference Information
| Application | 1. The most important applications are as accelerators and cross-linking agents in the rubber industry; 2. In the tire industry, a large amount of accelerators and cross-linking agents are needed, which are indispensable and important additives. IS set of practical and appearance requirements in one, widely used in some rubber and structural adhesive products, such as white sidewall glue, tire, buffer compound, rubber tube, carcass compound, adhesive tape, at the same time of “no frost spray”, the appearance of the semi-finished rubber product is guaranteed. 3. The application market of IS products IS very extensive, Cable shell, waterproof rubber tube, oil sealing material, raw tape, automobile inner tube, insulation protective equipment, automobile interior parts and other rubber products are the figure of IS. 4. In addition to industrial applications, the distribution of daily necessities is also very extensive. Common light-colored rubber products on the market often require a large amount of sulfur, such as rubber shoes with good water resistance, special rubber products such as seals commonly used in water and electricity construction, and household rubber products, toys, latex gloves and other high-grade rubber products. IS can improve the adhesive ability between the adhesive layers, greatly improve the quality of common rubber products, prolong the service life, compared with ordinary sulfur has many unique advantages. |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
One/Two-Component Epoxy Adhesive | Introduction Epoxy adhesive is a structural adhesive with high bonding strength. Suitable for bonding various substrates, especially with high bon... |
 |
Substrate wetting additive STD-204E | Introduction Composition: Non-silicone surfactant mixture Appearance: light yellow transparent liquid Active ingredient: 50% Solvent: ethylene ... |
 |
1,2-Bis(3-methylphenoxy)ethane CAS 54914-85-1 | CAS:54914-85-1, 54914-85-1 – Names and Identifiers Name 1,2-Bis-(3-methyl-phenoxy)ethane Synonyms F-203(EGTE)1,2-Bis-(m-tolylo... |
 |
Silicone and modified silane | Introduction Silicone and modified silane are adhesives with moderate adhesive strength, high flexibility, and low hardness, mainly used for bondi... |
 |
Diacetone Alcohol CAS 123-42-2 | Introduction Products name ： Diacetone Alcohol CAS NO. ： 123-42-2 Molecular Formula： C6H12O2 Structural formula： Us... |
Похожие товары
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
