Sulfur Hexafluoride (SF₆)
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Details
Product Name
Electronic Industry Grade Sulfur Hexafluoride
Sulfur Hexafluoride (SF₆)
Purity
Electronic Industry Grade: ≥99.999%
High-Purity: ≥99.9995%
Impurity Content (ppm)
| Impurity | Electronic Grade | High-Purity |
|---|---|---|
| Oxygen + Argon (O₂+Ar) | ≤1.0 | ≤0.5 |
| Nitrogen (N₂) | ≤2.0 | ≤2.0 |
| Hydrogen (H₂) | ≤0.3 | ≤0.1 |
| Carbon Tetrafluoride (CF₄) | ≤0.3 | ≤0.1 |
| Carbon Monoxide (CO) | ≤0.3 | ≤0.1 |
| Carbon Dioxide (CO₂) | ≤0.5 | ≤0.2 |
| Hydrocarbons (THC) | ≤0.3 | ≤0.1 |
| Hexafluoroethane (C₂F₆) | ≤5.0 | ≤2.0 |
| Perfluoropropane (C₃F₈) | ≤2.0 | ≤1.0 |
| Moisture (H₂O) | ≤1.0 | ≤1.0 |
| Total Impurity Content | ≤10.0 | ≤5.0 |
| Acidity (as HF) | ≤0.1 | ≤0.1 |
| Hydrolyzable Fluorides (as HF) | ≤0.3 | ≤0.3 |
Packaging
Available in 43.3L DOT cylinders, 440L Y-cylinders, and bulk tank trucks.
Applications
Sulfur hexafluoride is an ideal etching agent used extensively in microelectronics. With the advancement of technology, the application fields of SF₆ are continuously expanding and are widely used in more basic and scientific fields.
Safety Information
CAS Number: 2551-62-4.
Physical and Chemical Properties: Colorless and odorless gas, slightly soluble in water, ethanol, and ether. Melting point (℃): -51; Boiling point (℃): No data; Relative density (water=1): 1.67 (-100℃); Relative vapor density (air=1): 5.11; Saturation vapor pressure (kPa): Not applicable; Critical temperature (℃): 45.6; Combustion heat (kJ/mol): Not applicable; Critical pressure (MPa): 3.37; Flash point (℃): Not applicable; Ignition temperature (℃): Not applicable; Upper and Lower Explosion Limits (v%): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Cut off the gas supply. Spray water to cool the container, and if possible, remove the container from the fire area to an open space. Choose appropriate extinguishing agents based on the cause of the fire.
Health Hazards: Route of exposure: Inhalation. Pure product is essentially non-toxic. However, if contaminated with low molecular weight fluorides, hydrogen fluoride, especially decfluorane, the toxicity increases.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing and heartbeat stop, perform cardiopulmonary resuscitation immediately. Seek medical attention.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Thermosetting Special Powder Coating | I. Product Introduction In today’s world where extreme performance and environmental protection are both highly valued, the thermosetting sp... |
 |
Gray Color Hammer Powder Coating | Basic Info. iteminformation Model NO. Hammer Tone Finish Powder Coating Method Spray Main Raw Material Polyester Resin ... |
 |
Far-Infrared Functional Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview TheFar-Infrared Functional Powder Coatingis designed to emit far-infrared rays wit... |
 |
Imitation porcelain light luxury home decoration powder | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com This series of products adopts the new super-leveling technology. The product has the s... |
 |
Polyester based powder coating MT-JA220G White | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-JA220G is a polyester based powder coating, formulated using TGIC and is des... |
Похожие товары
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
