Pultrusion Epoxy STDResin8510
Introduction
STDResin 8510 is composed of epoxy resin (Component A), modified curing agent (Component B), and catalyst (Component C), specifically designed for pultrusion processes. It features low viscosity, long pot life, excellent processability, rapid curing at appropriate temperatures, outstanding mechanical properties, strong fiber adhesion, and recyclability through degradation.
Applications
- Pultruded pipes, rods, and profiles of various cross-sectional shapes and sizes
- Composite products manufactured by other pultrusion processes
Typical Physical Properties of Components (Pre-Curing)
| Component | Component A | Component B | Component C |
|---|---|---|---|
| Appearance | Colorless or pale yellow liquid | Colorless or pale yellow liquid | Colorless or pale yellow liquid |
| Viscosity (25℃)/mPa·s | 11,000-14,000 | 25-100 | 150-300 |
| Mixed Viscosity (25℃)/mPa·s | 500-800 | 500-800 | 500-800 |
| Density/g*cm⁻³ | 1.15-1.25 | 1.15-1.25 | 0.95-1.05 |
Mixing Ratio
| Component | Component A | Component B | Component C |
|---|---|---|---|
| Weight Ratio | 100 | 85 | 15 |
Cured Material Properties
| Property | Value |
|---|---|
| Tensile Strength/MPa | 75 |
| Tensile Modulus/MPa | 3,000 |
| Tensile Elongation at Break | ≥5% |
| Flexural Strength/MPa | 120 |
| Flexural Modulus/MPa | 3,000 |
| Glass Transition Temperature/℃ | 121 |
| Volume Shrinkage/% | <5 |
| Linear Shrinkage/% | <0.6 |
| Water Absorption (24h/7d, 23℃)/% | <0.4 |
*Data represents typical cured properties, not product specifications. Curing regime: 100℃/0.5h + 200℃/0.5h.
Pultrusion Temperature Zones
| Zone | Temperature/℃ |
|---|---|
| Zone 1 | 180±5 |
| Zone 2 | 195±5 |
| Zone 3 | 195±5 |
| Line Speed/m/min | 0.5 |
Gel Time
| Temperature/℃ | Gel Time/s |
|---|---|
| 120 | 360-460 |
| 150 | 70-130 |
| 160 | 45-80 |
| 180 | 25-35 |
| 200 | 10-20 |
Packaging
25Kg, 200Kg, 1000Kg
Storage Conditions & Shelf Life
- Store in a cool, dry, and clean environment.
- Reseal immediately after use.
- Shelf life: 24 months in original packaging under proper storage conditions.
Personal Protection
| Category | Requirement |
|---|---|
| PPE | Wear impermeable protective gloves to avoid skin contact. |
| Respiratory Protection | No special protection required. |
| Eye Protection | Chemical splash goggles recommended. |
| Body Protection | Use protective clothing resistant to this product. Equip with safety boots, gloves, eyewash stations, and emergency showers as needed. |
First Aid Treatment
Skin Contact
- Wash thoroughly with soap and water for 5 minutes or until contaminants are removed.
Eye Contact
- Lift eyelids and rinse eyes with flowing water or saline solution for 20 minutes.
- Seek immediate medical attention.
Inhalation
- Move to fresh air immediately.
- Consult a physician if symptoms persist.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
STD 2461 FluorinaSTD 2461 Fluorinated surfactant solutionted surfactant solution | STD 2461 is a fluorinated surfactant solution designed to significantly reduce surface tension and improve wetting properties in various coating an... |
 |
Polyimide Film Backed Heat Resistant Adhesive Tape il Silicone Tensile Elongation | Detail Information AttributeDetails Place Of Origin Guangdong, China Certification RoHS Product Name E1-IH807J Total ... |
 |
Indanthrone Blue CAS 81-77-6 | Introduction Indanthrone Blue, with the CAS number 81-77-6. is a high-performance pigment known for its deep blue color and excellent stability. T... |
 |
Indanthrone Blue CAS 81-77-6 | Introduction Indanthrone Blue, with the CAS number 81-77-6. is a high-performance pigment known for its deep blue color and excellent stability. T... |
 |
Low-Temperature Epoxy Resin STD8750 | Basic Information Low – Temperature Epoxy Resin STD8750 is a specialized epoxy system designed for applications requiring excellent performa... |
Похожие товары
 |
Powder coatings for automotive interior parts MT-A2201/MT-YN203GF | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YN218GF / | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be u... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I | Продавец: Standard International Group (HK) Limited | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof rack... |
 |
Basecoat powder coating MT-A2204/MT-MW188I | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2204 basecoat comes in an... |
