Waterborne two-component hydroxylated acrylic dispersion with high thick coating performance STD 203
Product Description
Waterborne two-component hydroxylated acrylic dispersion with high thick coating performance STD 2035 is a hydroxyfunctional polyacrylic dispersion designed for vehicle,machinery and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for tow-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/1-butoxy-2-propanol, approx. 44:4:4. Neutralizing agent,N,N-dimethyl ethanolamine(<2wt%), bound as a salt.
Properties
1. High gloss, gloss (60°) > 92%.
2. Excellent resistance to chemicals and salt spray.
3. Good weather resistance.
4. High hardness, hardness (combination with polyisocyanates) 2H.
Characteristic data
| Property | Value | Unit |
| Appearance | Milky white liquid | % |
| Weight solids | 46±1 | |
| pH | 7.0-9.0 | |
| Viscosity | 150-3800 | mPa·s |
| OH content | 4.2 | % |
| Density | 1.06 | g/cm3 |
*These properties are typical but do not constitute specifications.
Storage
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 6 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. It is suggested to filter before application and use up once the package is open.The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of N,N-dimethyl ethanolamine.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Low Cure Powder Coating –powder coating with export experience | Most powder coating chemistries required relatively high curing temperatures ranging from 350-400°F (177-204°C) for 5-20 minutes (substrate... |
 |
Outdoor quality-warranty weather-resistant wooden transfer powder coating | Introduction Standard transfer water-grain primer uses imported weather-resistant polyurethane PU system, which has the advantages of high lev... |
 |
Anti-graffiti powder coating/ | Brief description This series of products is based on saturated hydrocarbon polyester resin and isocyanate curing agent as the main base material,... |
 |
Gray Powder Coating | We manufacture and export a full range of gray tone powder coatings, available in RAL, Pantone, or custom shades – shipped globally from Chin... |
 |
Silicone Oil ALFARES-60000 | Product description ALFARES 60000 is a silicone fluid based on straight-chained polydimethylsiloxane fluids. Applications Thermostatic fluids (&... |
Похожие товары
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
