Epoxy Powder Coating

Surface Finish Options Overview

Introduction

The main components are epoxy resin and curing agent.

Brief description

It is mainly composed of epoxy resin and curing agent.

Features

• Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.)
• Good coating surface effect.
• Strong corrosion resistance.
• Good insulation.

Application areas

Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields.

Product series

Standard curing type and low temperature curing type are available.

Can be made into various glosses and colors.

Can be made into hot melt epoxy.

Technical parameters

Powder performance

Specific gravity: 1.1~1.8g/cm³

Mechanical properties

Test items	Test standards	Performance indicators
Pencil hardness	GB/T6739-1996	>2H
Adhesion	GB/T9286-1998	Grade 0
Bending	GB6742-86	Φ3mm
Impact	GB/T1732-93	50kg.cm
Cupping	GB9753-88	>6mm

Corrosion resistance

Test items	Test standards	Performance indicators
Salt spray resistance	GB/T1771-91	No change in coating after 1000 hours, unilateral corrosion at scratches <2mm
​Moisture and heat resistance	GB/T1740-79	Slight gloss loss after 1000 hours, ≤1 level

Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.

Application conditions

Pretreatment: phosphating, chromating, sandblasting.

Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping.

Curing conditions:

200℃ at 10 minutes.

180℃ at 15 minutes.

Can also be designed according to customer needs.

Drinking water product certification

British WRA5 standard..

US NSF61 standard.

German KTW/W270 standard.

Drinking water valve testing standards: BS/EN14901. ANSI/NSF61.

Packaging

Carton packaging, net weight 20kg/box.

Lined with double-layer polyethylene plastic bags.

Storage conditions

Store in a dry and ventilated room below 30℃.

Avoid direct sunlight.

Under this condition, the powder can be stably stored for 6 months.

Safety and health

• All raw materials of powder coatings do not contain toxic substances.
• No toxic gas is released during baking.
• Avoid inhalation of dust during use.
• Operators should wear dust masks.
• Minimize long-term contact between skin and powder.
• Paint attached to the skin can be washed with soap.

Другие товары поставщика

	Automotive Powder Coating	We are a leading Chinese powder coating factory with over 20 years of export experience, supplying high-quality coatings to automotive manufacturer...
	PTFE powder/polymer powder coating	It is made of PTFE resin as the main base material and combined with high temperature resistant resin. It needs high temperature baking to form a f...
	Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes	Product Introduction: This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents,...
	Antimicrobial and Antiviral Powder Coating	Product Introduction: This product is formulated using special resins, curing agents, and specialized antimicrobial agents. It features high react...
	Morandi series powder coating	Place of Origin China Main Raw Material Polyester/Epoxy/Epoxy-Polyester Usage Appliance Paint, Building Coating, Boat Paint, Car Paint, Furnit...

Все товары поставщика

Похожие товары

	Easy-cleaning Silicone-Modified Waterborne UV Resin	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
	Water-based Soft-Touch Resin for Consumer Electronics	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
	Conformal Coatings	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
	Metalized & Laser Transfer coating	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
	Hydrophilic coatings for Air Conditioner	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...