Exterior durable polyester powder coatings with antimicrobial technology MT-610 AM
Product description
MT-610 AM is a range of polyester TGIC Free powder coatings designed for exterior exposure with good weather resistance from just one application with specific antimicrobial activity. The coatings sustain a longer lifespan and are available in a wide range of colors and finishes which allow your product to shine. Additionally,MT-610 AM uses antimicrobial technology to reduce the number of microbes such as bacteria and mold. Test results have proven a reduction of bacteria and mold up to 99.9%.
MT-610 AM offers not only beautiful aesthetics but also a performance to match. It is ideally suited to a broad range of outdoor applications including outdoor furniture, playground equipment, signs, fencing, vending machines and general metal finishing. Can also be used for indoor application if required.
Powder properties
| Typical value | |
| Chemical Type | Polyester – TGIC Free |
| Density | 1.2 – 1.9 g/cm³, depending on colour and effect |
| Recommended film thickness | 60 – 90µm |
| Shelf life | 24 months below 30 °C
12 months below 35 °C |
| Storage Conditions | Under dry, cool (≤ 30°C) conditions
(open boxes must be resealed) |
| Curing schedule | 30-40 min at 170°C
10-20 min at 180°C 8-16 min at 200°C (at object temperature) |
Pre-treatment
Galvanised steel requires surface preparation by either multi-stage pretreatment using either zinc phosphate or chromate conversion or controlled sweep blasting. Depending on the type of galvanizing, degassing or use of anti-bubbling additives may be required – follow the procedural advice of the pretreatment supplier. Iron phosphate and particularly Zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
Powders can be applied by manual or automatic electrostatic spray equipment. A good protection is linked with the recommended film thickness. All powders can show small color differences from batch to batch, this is normal and unavoidable. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect” and changes in aspect after recycling. Different substrates (aluminium, steel, galvanized steel…), use of primer, and big changes in film thickness may give a different aspect. Products with different codes should not be mixed even if same colour and gloss. It is recommended that for consistent application and appearance product be fluidized during application.
Test conditions
Actual product performance will depend upon the circumstances under which the product is used. Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Pre-treatment | Zinc Phosphate |
| Substrate | Polished steel |
| Curing schedule | 10 min at 200°C |
| Film Thickness | 60 – 70µm |
Mechanical tests
| Typical value | Method/standard | |
| Adhesion | Class 0 | ISO 2409 (2 mm Crosshatch) |
| Erichsen cupping | Pass 5 mm | ISO 1520 |
| Flexibility | Pass 5 mm | ISO 1519 |
| Hardness | Pass – no penetration to substrate | ISO 1518-1 (2000g) |
| Impact resistance | Pass 2.5 Joules reverse & direct (20 in lb) | ISO 6272-2 (d/r) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Woodgrain Thermal Transfer Powder Coatings | Introduction Product SegmentationApplication Fields General Thermal Transfer Powder Coating Interior surfaces of aluminum profiles, se... |
 |
Specialty Powder Coatings for the Automotive Sector | Introduction Product SegmentationApplication Fields Weather-Resistant Decorative Powder for Vehicle Exterior Whole vehicle coatings fo... |
 |
Office Furniture Powder Coating | Product Features Superior Charge Retention and Leveling: Offers higher gloss, full and bright appearance, and excellent reflectivity. High Transf... |
 |
Low temperature environmentally friendly pure polyester/PRIMID powder coating | Product Description This series of products uses saturated polyester resin and Primid curing agent as the main base material to make thermosetting... |
 |
Flat matte MT-049/82008 | Introduction No. MT-049/82008 Color Matte black Surface Flat matte System Polyester/049 Scope of application Fu... |
Похожие товары
 |
Calabashes Finial | Продавец: 868715 | Hangzhou Chuanya Building Materials Co., Ltd. offers Calabashes Finial, a decorative roofing acce... |
 |
Casting Grinding Balls | Продавец: 869376 | Casting Grinding Balls , so called as Casting Grinding media balls,casting grinding steel ba... |
 |
Key Quality Factors in Food Contact Paper Production | Продавец: Zhejiang Guanghe New Materials Co., Ltd. | Guanghe supplies food-grade parchment paper for commercial bakeries, food processors, restaurants... |
 |
Heat Sealing Sterilization Pouch | Продавец: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Продавец: Trucont LLC | В компании Trucont LLC мы постоянно предлагаем лом каталитических преобразователей для немедленно... |
