Valves and pipes powder coating

Introduction

The main components are epoxy resin and curing agent.

Brief description

It is mainly composed of epoxy resin and curing agent.

Features

• Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.)
• Good coating surface effect
• Strong corrosion resistance
• Good insulation

Application areas

Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields

Product series

Standard curing type and low temperature curing type are available

Can be made into various glosses and colors

Can be made into hot melt epoxy

Technical parameters

Powder performance

Specific gravity: 1.1~1.8g/cm³

Mechanical properties

Test items	Test standards	Performance indicators
Pencil hardness	GB/T6739-1996	>2H
Adhesion	GB/T9286-1998	Grade 0
Bending	GB6742-86	Φ3mm
Impact	GB/T1732-93	50kg.cm
Cupping	GB9753-88	>6mm

Corrosion resistance

Test items	Test standards	Performance indicators
Salt spray resistance	GB/T1771-91	No change in coating after 1000 hours, unilateral corrosion at scratches <2mm
​Moisture and heat resistance	GB/T1740-79	Slight gloss loss after 1000 hours, ≤1 level

Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.

Application conditions

Pretreatment: phosphating, chromating, sandblasting

Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping

Curing conditions:

200℃ at 10 minutes

180℃ at 15 minutes

Can also be designed according to customer needs

Drinking water product certification

British WRA5 standard

US NSF61 standard

German KTW/W270 standard

Drinking water valve testing standards: BS/EN14901. ANSI/NSF61

Packaging

Carton packaging, net weight 20kg/box

Lined with double-layer polyethylene plastic bags

Storage conditions

Store in a dry and ventilated room below 30℃

Avoid direct sunlight

Under this condition, the powder can be stably stored for 6 months

Safety and health

• All raw materials of powder coatings do not contain toxic substances.
• No toxic gas is released during baking.
• Avoid inhalation of dust during use.
• Operators should wear dust masks.
• Minimize long-term contact between skin and powder.
• Paint attached to the skin can be washed with soap.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Другие товары поставщика

	IT industry powder coating	Brief description: Made of TGIC polyester, epoxy polyester mixed type, etc. as base materials Features: Excellent physical and mechanical proper...
	Water-dispersible isocyanate curing agent STD 268	Product Description STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyure...
	Metallic flat high gloss MT-049/98010	Introduction No. MT-049/98010 Color Metallic color Surface Metallic flat high gloss System Polyester Scope of ap...
	Talc Powder MT-TYT-888A	Product Introduction MT-TYT-888A is a high-grade talc powder produced by our company using internationally advanced airflow impact grinding techno...
	Acrylic Clear Powder Coatings	Surface Finish Options Overview Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clarity and flowing...

Все товары поставщика

Похожие товары

	Hot Melt Adhesive for Vacuum Insulation Panels	Продавец: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
	Hot Melt Adhesive for Packaging	Продавец: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
	Hot Melt Adhesive for Hygiene Products	Продавец: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
	LSAW Steel Pipe & Tube	Продавец: HEBEI TIRICO PIPELINE CO.,LTD	LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ...
	Anti-Corrosion Steel Pipe & Tube	Продавец: HEBEI TIRICO PIPELINE CO.,LTD	Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti...