Transparent powder coating
Product Overview
This series of products is made of polyurethane or acrylic resin with curing agent, and is a transparent powder coating with high transparency and excellent flatness resistance.
Application areas
Main applications:
- Automobile topcoat and exterior parts
- Automobile wheel coating
- Indoor and outdoor metal parts protection
- High-performance finish layer for various metal appliances
Typical application scenarios:
- High-end metal furniture
- High-end hardware products
- Bicycle parts
- High-end door handles
- High-end craft products
- Gloss protection layer for metal powder coatings
Technical parameters
Basic properties of powder:
Specific gravity: 1.1~1.3g/cm³
Volatile matter: <0.5%~2% (depending on product type)
Flow rate: >130 (with good fluidization and conveying performance)
Features
| Category | Features | Curing conditions | |
| PE/TGIC | Polyester/TGIC | Good leveling, excellent weather resistance, good transparency | 200℃/10min |
| Polyester/TGIC | Good leveling, excellent weather resistance, good transparency | 200℃/10min | |
| PU | polyurethane type | Good leveling, excellent weather resistance, good transparency | 200℃/15min |
| Acrylic/PU | Mixed acrylic | Good leveling, excellent weather resistance, excellent weather resistance, solvent resistance | 200℃/10min |
| Acrylic | Acrylic | Excellent weather resistance and solvent resistance, Impact resistance can reach ±10kg.com. 200℃/10min 170℃/20min |
170℃/20min |
Coating performance
| Item | Reference standard | PE/TGIC | PU type | Acrylic/PU | Acrylic |
| Appearance | GB5237.4 | Flat | Flat | Flat | Flat |
| Leveling | Q/TXSLD01-03 | Grade C | Grade B | Grade B | Grade A |
| Transparency | Q/TXSLD01-03 | Grade B | Grade B | Grade B | Grade A |
| Impact | GB/T1732-93 | ±50kg.cm | ±50kg.cm | ±50kg.cm | ±50kg.cm |
| Cupping | GB/T9753-88 | >6mm | >6mm | >6mm | >6mm |
| Adhesion | GB/T9286-98 | Grade 0 | Grade 0 | Grade 0 | Grade 0 |
| Bending | GB6742-86 | Φ2mm | Φ2mm | Φ2mm | Φ2mm |
| Indentation hardness | GB9275 | ≥80 | ≥80 | ≥80 | ≥80 |
| Salt spray test | GB/T1771-91 | No change after 1000 hours | No change after 1000 hours | No change after 1000 hours | No change after 1000 hours |
| Wet heat test | GB/T1740-79 | 1000 hours level 1 | 1000 hours level 1 | 1000 hours level 1 | 1000 hours level 1 |
| Aging test Light aging | Light aging: ASTMG154QUV0.78w/m2@340nm500h | Gloss retention rate ≥80% | Gloss retention rate ≥80% | Gloss retention rate ≥80% | Gloss retention rate ≥80% |
| Note: The above tests all use 0.7mm thick degreased aluminum plates with a film thickness of 60-80μm; the above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, substrate, pretreatment, and spraying process. | |||||
Packing specifications
Standard packaging: carton lined with plastic bag
Net weight per box: 20kg
Transportation classification: non-hazardous goods
Safety instructions
Raw materials do not contain highly toxic substances
Precautions for use:
- Avoid inhalation of dust (it is recommended to wear a dust mask)
- Reduce direct skin contact
- Skin contamination can be washed with soap
- Avoid contact with chemicals during storage
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Outdoor powder coatings | Introduction Outdoor powder coatings are advanced protective and decorative coatings designed for long-lasting performance. Applied as a dry powde... |
 |
Gray Series Powder Coating | Introduction We manufacture and export a full range of gray tone powder coatings, available in RAL, Pantone, or custom shades – shipped glob... |
|
|
Pure polyester/TGIC powder coating | Product description This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting p... |
 |
Thermosetting Decorative Powder Coating | I. Product Introduction Thermosetting decorative powder coating is a new generation of metal surface treatment technology. It forms a wear-resista... |
 |
Bridge powder coating | Introduction Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical pro... |
